Jump to content
SAU Community

Recommended Posts

SAU users used to tend to be exclusively older, as the price of the cheapest import Skyline was $30k+. However, these days I feel a large part of the deterioration of SAU is the fact that a turbo Skyline can be had for well under $10k, and this opens the forum up to a myriad of younger users, who tend to type before they think on occassion.

hope i dont add to the 'type before they think on occasion' part

Anyone keen for a cruise down to victor one sunday in the next couple of weeks? Have lunch at the pub, chill out, get some pics etc. Weather the past couple of days has been awesome and been keen for a cruise.

Anyone keen for a cruise down to victor one sunday in the next couple of weeks? Have lunch at the pub, chill out, get some pics etc. Weather the past couple of days has been awesome and been keen for a cruise.

I would be keen.....if i wasn't working every Sunday till 4pm

good to hear you arent apologising for something you dont have

just about every post I have seen you make has either been you blowing your own trumpet informing the world how good you are...hows the weather up there on your high horse there champ?

I wasnt the only one to notice it...and this is why you have had an example made of you

a few cliffnotes

1. you are not funny

2. you are not cool

3. your car sucks ass

4. shouting "nice cans" at a comittee member of a car show I am heavily involved in is a very quick way to lose your right to attend it

5. no one...and I repeat no one cares what you think about anything, ever

HTH

ahahahahha well said!!!

GOLD!!!!!!! :P

i had to lol at a mate of mine that i have not seen for a few years.... he has a tattoo of barbed wire around his bicep, and a spiderweb on his elbow and did not know that they both symolise u have been in jail

hahahahaahha

man this place is like aids lately, do not want.

ur words say no but your attendance says otherwise, sounds like someone is keen to join my club. and andrew its not son of rajab of the fags its "gay son of rajab" thank you

I definitely don't hate NS, but observe that the vast majority of posters 1). are under 18 years of age, and tend to show their lack of maturity in their comments and posts, and 2). the vast majority of users actually don't even own a car - yet are happy to shell out advice and opinions as though they are gospel.

very valid observation, but is it really only the young 1s that start the tear work? think we've had some older emo's in our time aswell. unfortunately growing up is only optional where as only growing old is not. but eh what ya gonna do :P n yes there prob is more younger emo's than older

i find it odd there are constant posts of sau is going down hill but they still keep coming back, its like fnfurious movie. you'll all complain its no good but you'll still pay good money to go see it.

I would like to personally shake hands with the person who invented seedless watermelon

i prefer shaking hands with beef myself

n craig you prob 1 of those ppl on tv that have the million dollars in interest waiting for them they dont know about :)

and i disagree with point number 5 position 3. if he does not care what he thinks then why post on here and eager for his response.

Edited by Inline 6

"For a long time, Koreans thought Dr. Wu Jang Choon invented seedless

watermelon, when in fact, he was the first Korean to demonstrated it in

Korea.

He never claimed to be the inventor. He was merely demonstrating the power

of the genetics. However, this revered Korean scientist was falsely

credited (by and amongst Koreans) for decades after his death in 1959.

It is indeed a Japanese scientist who invented it."

On a forum

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...