Jump to content
SAU Community

Recommended Posts

umm this is gonna be probably sound dumb for u turbo peoples

but if i get a stock r33 turbo, will i have to get a stock r33 bov to go with it or can i get a r34 one if i cant find a stock r33 bov?

Lol cara the Blow off valve its self has nothing to do with the type of turbo you are running so Just use a R34 BOV or whatever you can get your hands on, Maybe get an aftermarket one that lets it go to the atmosphere so you dont have to worry about modding your air intake to suit the plumb back factory style.

umm this is gonna be probably sound dumb for u turbo peoples

but if i get a stock r33 turbo, will i have to get a stock r33 bov to go with it or can i get a r34 one if i cant find a stock r33 bov?

block it and make it sound like you got 100 pigeons stuffed under your bonnet....btw cara may i ask why you getting a R33 turbo and not something bigger as my stock turbo makes 211 and then sort of runs out of puff towards the end...and no point turbo charging a NA, only to be limited by the turbo......get something bigger for around 300+rwkw mark.....well thats at least what i would have thought :laugh:

block it and make it sound like you got 100 pigeons stuffed under your bonnet....btw cara may i ask why you getting a R33 turbo and not something bigger as my stock turbo makes 211 and then sort of runs out of puff towards the end...and no point turbo charging a NA, only to be limited by the turbo......get something bigger for around 300+rwkw mark.....well thats at least what i would have thought :laugh:

ummm... because she is turbo charging an NA??

i'm presuming you dont know much about compresion ratios?? turbo car has a compresion ratio of about 8.5:1, NA is about 14:1, meaning that you cant actually put a massive turbo and/or run much boost on an NA car... its all to do with things exploding =P

Cara, if you haven't done so already, keep in mind the Neo motors have a longer throttle body, so the intake piping to which the BOV is attached to is shorter than your average 33. Therefore the 33 intake piping wil not suit your Neo. Need a Neo DET pipe.

:laugh:

ummm... because she is turbo charging an NA??

i'm presuming you dont know much about compresion ratios?? turbo car has a compresion ratio of about 8.5:1, NA is about 14:1, meaning that you cant actually put a massive turbo and/or run much boost on an NA car... its all to do with things exploding =P

I know its different compression ratios etc......i would really think that it would be worthwhile just getting a DET motor instead of tweaking the NA DE.....and try flogging the DE motor off or use it for spare parts :laugh:

very nice 32 buddy boy^^^.....same BBS wheels as my old bus

you have the coolest job ever Pete

not really Carl.......probably would be if I could charge 1 Gazillion Dollars per year!

ummm... because she is turbo charging an NA??

i'm presuming you dont know much about compresion ratios?? turbo car has a compresion ratio of about 8.5:1, NA is about 14:1, meaning that you cant actually put a massive turbo and/or run much boost on an NA car... its all to do with things exploding =P

LOL Fishy, I think you're thinking of Matty's & my diesel trucks (although they're alot higher than that)....but yeah, comp ratios are higher on NA no doubt.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...