Jump to content
SAU Community

Recommended Posts

What's the max wheels that'd fit under R32 GTR guards? I've seen 18x10+12 and they're still inside the guards. Anyone know of anyone running 18x10.5?

dont know how wide my rims are but i got 275x35 tyres on 18s. id say they are as big as you can go without rubbing as there's very little room on full lock

must have a look 1 day how wide them rims are.

Edited by Inline 6

Who here has the right equipment (timing light) to check the timing on an RB25DET motor? (I know a normal timing light from the auto shops don't work with coil packs). Would like to check the timing on both my rides this weekend.

:D

Who here has the right equipment (timing light) to check the timing on an RB25DET motor? (I know a normal timing light from the auto shops don't work with coil packs). Would like to check the timing on both my rides this weekend.

:D

All you do is take the no.1 coil pack out take the boot off and put a regular spark plug leed between the coil pack and the spark plug. Then you hook up the timing light to the leed as per normal

All you do is take the no.1 coil pack out take the boot off and put a regular spark plug leed between the coil pack and the spark plug. Then you hook up the timing light to the leed as per normal

Yeah ... there's always that. But I don't even have a regular lead :D

What's the max wheels that'd fit under R32 GTR guards? I've seen 18x10+12 and they're still inside the guards. Anyone know of anyone running 18x10.5?

I have 18x10 +20 rims on my R32 GTR with 275/35/18 tyres and had to get the guards rolled to fit the tyres. These rims came with the car but I personally wouldn't go wider than 9.5" if I was buying rims for the car. My rims sit inside the guards at the top but not at the bottom. I wouldn't even try for 10.5".

http://www.news.com.au/adelaidenow/story/0...5006301,00.html

that happened like 50m from my house and it looks like the car they used was my old r33 that i sold to a guy that lives locally

hope its not my old car :rofl:

http://www.news.com.au/adelaidenow/story/0...5006301,00.html

that happened like 50m from my house and it looks like the car they used was my old r33 that i sold to a guy that lives locally

hope its not my old car :rofl:

Omg it was a 1996 Nissan Skyline! It was horrible! Wont somebody think of the children!!!!!!!!!!

hey daniel would you like to upgrade your current mobile phone plan?

just thought id join in

its funny cause i've been pestered by telstra lately about that.

and yes i did mean coilpacks, been getting an intermittent ignition fault code and its been narrowed down to the coils.

anywho...

have just put up a couple more photos, nothing special again and listed a couple of small things in my garage.

http://www.news.com.au/adelaidenow/story/0...5006301,00.html

that happened like 50m from my house and it looks like the car they used was my old r33 that i sold to a guy that lives locally

hope its not my old car :rofl:

it was a s2 r33 in dark silver with 34 gtr rims onit

was on the news a little while ago.

and after tonights activities, matty has me seriously considering getting a rig of my own :rofl:

Although that happens after everytime we go out in it lol.

Anyone wanna buy a BA falcon? lol. Its got rims and exhaust yo!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...