Jump to content
SAU Community

Recommended Posts

oh dear, last nite was a hoot

dave, hows the random body parts that got slammed into the door frame / pillar of my car?

should upload a few photos when i get my camera out the car......wasnt overly muddy but we found a good spot to go through. Even the cop that rocked up was chilled

So in light aircraft back here then? Errmm...No thanks :happy:

i prefer to call them dingy's in the sky

anyone know the causes of hard to start rb25? its cranks over but takes 5-6 times to slowly get running.. once its running if i turn it off then back on its fine..

its like only once its been sitting for a few hours!?

any ideas?

I have the same problem as well....so far cannot work out what it is arrgh

Next time you get on a plane flight and the guy next to you is an a-hole or the lady won't keep her kids coralled from kicking your back .... follow the instructions below ....

What to do in a flight when you have an annoying passenger seating next to you ...

1. Remove your laptop from the briefcase;

2. Open the laptop slowly and carefully:

3. Turn it on, as well as the sound;

4. Make sure that the passenger next to you is looking;

5. Access the Internet;

6. Close your eyes for a few moments, open again and look up to heaven ;

7. Take a deep breath and open the site: http://www.myit-media.de/the_end.html

8. Observe the facial expression of the passenger seating next to you.

Since i fly a lot for work i will keep this in mind LOL

Just putting the word out there that if anyone is interested in coming to Ministry of Sound Trance Nation to HQ next friday please hit me up for some tickets as its $30 on the night and the tickets are $20....cheers

BTW... If you want to prove a point N/A wise... You should do it in a 7.4L v8 or something. There is nothing that can be proven in a 2.5ltr 6Cyl N/A :down::P

I would be a bastard and say "rolls royce merlin' but theyre super charged so i have to settle for Rolls Royce Meteor

rd&l

-D

oh dear, last nite was a hoot

dave, hows the random body parts that got slammed into the door frame / pillar of my car?

lol, it was a riot. lookin forward to the next outing. got a few killer bruises from that door of yours.

Life Story entry #336

Loaded and delivered some of the jarrah flooring that I purchased yesterday and today. Oh boy, did I bite off more than I can chew! I'm barely halfway thru it. Getting the rest of the 180m2 of flooring next Sunday (after dyno day).

I've still got splinters in my hands :rofl:

This week I gotta order the floor framing materials.

Life Story entry #336

Loaded and delivered some of the jarrah flooring that I purchased yesterday and today. Oh boy, did I bite off more than I can chew! I'm barely halfway thru it. Getting the rest of the 180m2 of flooring next Sunday (after dyno day).

I've still got splinters in my hands :rofl:

This week I gotta order the floor framing materials.

How about wearing some gloves?

Attn scandy;

How much was your turbo rebuild and hiflo and where did you get it done again? Looking at buying some N1's that are in need of rebuild cheap and sussing my options if its even worth buyin haha

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...