Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

thanks Cyrus atleast someone remembers me around here ;)

very nice looks almost exactly same specs as alot of my parts

n1 block, billet crank and hks t04z :)

i have added a few goodies this time again so it will be good to see how much u can get out of the t04z. My previous quick tune on 22psi managed 605hp at wheels (on pump fuel) before the current changes. I dont think the t04z will go too 700hp at wheels but im gonna try :worship:

is the crank stock capacity or does it have extra stroke?

i would be putting on an ATI 1000hp balancer too for safety. Also with a nismo oil pump i'd upgrade the sump capacity and fit a rear oil drain to the head.

Edited by unique1

when i first saw this car a couple of years ago i thought it was the best stagea i'd ever seen.......i cant believe the time and money you've put into that monster and now i'ts even better ............. congratulations on a great car

regards leigh

thanks Cyrus atleast someone remembers me around here :P

very nice looks almost exactly same specs as alot of my parts

n1 block, billet crank and hks t04z :banana:

i have added a few goodies this time again so it will be good to see how much u can get out of the t04z. My previous quick tune on 22psi managed 605hp at wheels (on pump fuel) before the current changes. I dont think the t04z will go too 700hp at wheels but im gonna try :P

is the crank stock capacity or does it have extra stroke?

i would be putting on an ATI 1000hp balancer too for safety. Also with a nismo oil pump i'd upgrade the sump capacity and fit a rear oil drain to the head.

Hahaha, I didn't forget you either Brad, but we haven't had an update on your progress for a while, so I kinda assumed that you were either too busy to work on it or were saving for or planning your next round of mods.

Any new photos?

Cheers peoples.

all those photo's make me dizzy. :banana:

shall be one hell of a 260RS (and debt for that matter) when its done however..

that engine crane is a bloody good idea!

i assume it lets you adjust the angle of the engine? i had issues as i dropped the whole engine and box in mine, and the angle had to be steep to get the box under the tunnel, then i struggled to pull it back up and drop the engine on the mounts.

PS: what are you lurking down there for dale? still trying to clean up the mess you made? :P

Allows tilt adjustment indeed. It’s awesome. Made By Wayco (others do them though. Part number W1609?)

I am confused over the dale / mess remark… :).

part from teh A-pillar speakers ... l'm in love with that stereo install!!!

Kicker sponsorship???

Kicker NZ gave me a really good deal. Cheers guys.

There are no words to properly express the total and utter awesomenlyness of this thread. Well bloody done dude!!!

Thanks

That is awesome.

But you didnt leave any money over for a t-shirt...

That’s my friend who wants to learn. I still have one T shirt left 

thanks Cyrus atleast someone remembers me around here :)

very nice looks almost exactly same specs as alot of my parts

n1 block, billet crank and hks t04z :)

i have added a few goodies this time again so it will be good to see how much u can get out of the t04z. My previous quick tune on 22psi managed 605hp at wheels (on pump fuel) before the current changes. I dont think the t04z will go too 700hp at wheels but im gonna try :P

is the crank stock capacity or does it have extra stroke?

i would be putting on an ATI 1000hp balancer too for safety. Also with a nismo oil pump i'd upgrade the sump capacity and fit a rear oil drain to the head.

It has oil feed restriction to the head and oil drain. Do not need the bigger sump. It’s just a cruiser made for “no gap required” overtaking. Looked at the ATI pulley but not required. Each individual part was balanced to within 1 / 1,000,000kg, then part by part as a system til the whole bottom end (incl fly, clutch, crank pulley etc) was balanced to 1 / 1,000,000kg.

I want 750 – 800hp at the fly. Only time will tell. That is really stretching the turbo though.

aww we didn't forget you brad :D Your engine bay is still the best I've seen :)

With a stereo set up like that OP, are you putting the car into shows?

Shows indeed. I want to see if it will actually win any prizes (I stop here before a rant begins).

Should be driving in about 2 weeks, then do a 5,000km run in, then a tune. When I get the time I will be adding / making the under bonnet diffusers, underbonnet heat extraction system, custom guards, blow off valve control, seperator tank and oil catch can.

holy

f**k

... all i gotta say

besides - where you peddling that meth - i need new bsuiness - all my kids are broke :P

"Ask your local dealer for franchise opportunities in your area"

Hahaha, I didn't forget you either Brad, but we haven't had an update on your progress for a while, so I kinda assumed that you were either too busy to work on it or were saving for or planning your next round of mods.

Any new photos?

hey mate i been busy and keeping a low profile on forums i get in trouble if i open my gob hahah

heres 2 pics from last time it was together...

DSC00023resize.jpg

DSC00022resize.jpg

should be all finished the same time as mr meth here as its totally assembled with the new goodies and just has to go back in the car now and the run in is started again :)

sorry for the slight hijack pure meth

hope it all goes well for ya i know the feeling of motors melting pistons :D

p.s. those volk gtc's are damnnnnn hottt :)

Hey Mr Meth (Simon is it?) that looks awesome, whats the 100 braided lines around the plenum for? the twin fuel coolers i suppose? definately not a cheap exercise with braided lines everywhere, but looks mint :w00t:

your stagea is definately the hottest and most completely modified one ive seen with that nice red paint, volk rims, monster stereo and killer engine it will win all the shows for sure i bet on it :laugh:

what ecu are u running? i slightly recall a fcon pro V is what u used on the old setup?

what power (at the wheels) did the last motor end up at and what boost?

where abouts do u plumb your turbo water lines into on the motor?

cheers

Edited by unique1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...