Jump to content
SAU Community

Recommended Posts

Hi there,

Well, it was bound to happen, the fence decided to attack the front bumber of my S2 Stagea. I wasn't driving, it was the missus. :cheers:

I'm looking for a bit of touch up paint in the form of a pen or small pot, whatever is best to cover up a couple of 3cm x 2cm scrapes on the corner of the bumper. Will i be able to find something in repco or autobarn? It's sonic silver right?

Link to comment
https://www.sau.com.au/forums/topic/190445-touch-up-paint-need/
Share on other sites

I've searched all those stores and bought 3 different silvers, none of which match

I think you need to go to a paint store and get them to make up some

Hmm... that's not good...

Any reputable auto paint supplier should be able to mix it up for you and put it in a pressure pack.

(KR4 has a few variants so be careful)

Is KR4 the paint i'm looking for then?

There's a definite slight Pewterish tint to the silver isn't there.

Edited by webng

Depending on how big the scratches are, either just brush touch it up, or get a pressure pack, some plastic primer and some clear. Practise on something else first.... If the colour is right, it's possible to get it virtually invisible on a bumper corner. If the colours even slightly off, it'll look sh#thouse so go to a specialist autopaint shop, ie not autobarn repco etc.... I've done this a few times for people and charged them good money for it..... and I'm not a professional painter. Pm me if you want some tips :turned:

Hey yeah thanks for that, was wondering myself what the "Z" was, thought it might be some sort of shade or something.

Got some good tips from TimHeather too, will hunt for some paint this weekend.

I think you will find the "Z" is the interior colour spec, so not related to the paint, might confuse the paint guys so thought it was worth mentioning...

Nah... my driveway would eat that bar! Looks sweet though.

Or... You could just leave it slightly scratched, (pics?) and swap with me for my Dolphin Front Bar - already painted Sonic Silver! Let me know! Read my Thread!
I got some touch up paint in a small bottle with brush from local Nissan dealer - they needed a few days to get it in but it matches fine.

Cost about $12 or so, from memory

Yeah? Would they have Sonic Silver, being import and all?

They do have it as that is what I got, since mine is Sonic Silver

Just give them the paint code and they should be able to get it for you

Spoke to a large Nissan dealer in Adelaide and they said they don't and couldn't get the paint. Which dealer did you get yours from? Might have to get 1 sent.

  • 3 months later...

Anyone know where I could find some QT1 touch-up paint in or near Adelaide (SA) ?

...can you even get the pearl white in touch up? Kind-of an interesting finish, all metal-flake and all, don't know if you can 'can it'? :)

bought in japan...

I thought x-trail might have come out in QT1 ?? Nissan usually sell touch up paint. If you were in brissie you could help yourself to mine.

Cool... is that Holts? Maybe one could order some through a Holts dealer in SA... hmm

Edit: going to try Nissan supplier... soon as I get the name off my compliancer

Edited by DaveB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...