Jump to content
SAU Community

Recommended Posts

I have 9k to spend on my car 2k is going to body work the other 7k is for performance.

Any ideas what to do?

My end goal is about 350rwkw this round of mods id be happy with 260-280rwkw

I though of putting in an rb25 new afm injectors coilpack bigger turbo all running from my rb20 ecu.

Next round of mods would be forged bottom end.

How does that sound or is there abetter way to go?

Link to comment
https://www.sau.com.au/forums/topic/190840-best-way-to-spend-7k/
Share on other sites

Unless of course you do it all yourself.

RB25DET

+HKS gt-rs or 3076R on standard manifold. $2400

HKS Exhaust or equivilant. 3" $1200

decent frontmount kit. $600

Engine management $1500

nismo 555cc Injectors $870

z32 AFM $450

Splitfire Coilpacks $525

Decent Fuel Pump $300

total So far $7320 + tune $500.

You could save yourself some money using a Garett Huffer which is only about $1600

so that brings it down to $7520

So you can add a Oil cooler $400. Plus new oil $60.

New total :

$6990.

These Estimate of course are very rough. But that brings you quite close to your immediate goal. There are many different routes you could take. You could however, start off with a strong build, that way you will be ready for your go fast bits to get up to your 350rwkw goal. And in doing anyjob like this You will be suprised how many other little things you will have to get that you didnt think of even when doing it yourself.

If you got 7k to spend, budget 6 for parts. and 1k for the unexpected which will happen.

You will also need a decent clutch.

If you want transplant go RB26.

for about $4.5-$5K you can get

used RB26 complete with turbos, AFMs, intake gear, injectors, intercooler etc etc.

get the sump modified and fit it up.

run 1 bar boost and whack in a power FC then you have 250-270rwkw all day long. it will probably stretch your budget a bit and you will need a few other things like fuel pump etc but it will be pretty cool.

Why go rb26 when you can go a much cheaper alternative of a 25/30 and then spend the rest on a turbo, management and injectors?

Also, there is a guy over in tassie with a tuff little rb20 already setup thats not in the car yet, td06, management, injectors, HKS cams etc... maby ask him if his interested in a swap + cash or something. After seeing Roys results with an rb20 running a similar setup (minus cams) I wouldn't be surprised to see it kick out some very decent power.

Rb26s are overpriced in my opinion, they do offer a few advantages (cams, plenum, lifters to mention a few) but the way I look at it, a hybrid costs less, make alot more midrange and with is ability to spool a the huffer sooner, will make a much more street able car.

Or you could go to the casino, double your money and drop in a 2jz or even an ls1. Do it, I dare ya!!! hahaha

yeah a + 1 for a 25/30 hybrid also... bigger bang for your buck! Find a good cond stock bottom end that is known to be healthy, get a head, some GTR cams and regrind them larger (PM cubes for this) then with standard manifold run a GT3076 with the larger ex housing, IW and grab an RB20 ecu, rechip that (you'll be ditching the VCT anyway) and you'll make an easy 300 + rwkw reliably, keep the revs below 7000 and it should last a long time.

motor $100-200 (for a s2-3 RB30 in good cond, only need bottom end)

head $900-1000

cams + regrind $500

RB20 ecu $100

remap and tune $500

turbo + lines and dump $2.2K

still got plenty money left to play with

motor $100-200 (for a s2-3 RB30 in good cond, only need bottom end)

head $900-1000

cams + regrind $500

RB20 ecu $100

remap and tune $500

turbo + lines and dump $2.2K

still got plenty money left to play with

Hmm I could be wrong but there seems to be a few things missing here..

he has

currently rb20det with FMIC pod filter TBE r34gtt turbo. Apexi AVCR boost controller.

Before the turbo was put on it was making 195rwhp. Going in for retune of stock ecu hopefully this weekend

you don't seem to have any:

gasket kit - $250

valve springs - $500

Machine shop work for head and block deck for a perfect seal and to tap the nw timing belt pulley - $300?

New water pump, idler and pulleys - $300

new timing belt - $150

injectors - $500

fuel pump - $300

Z32 AFM - $300

clutch - $700

run in oil, new oil, oil filter, new coolant etc - $150

other (covers things like new hoses, vacuum lines, bolts and nuts you break, little seals from the 20 year old bottom end that might be leaking etc) - $500

how's that budget 300rwkw coming along now?

I reckon stick with the original RB25 transplant, but plan to get the bottom end forged for over 260rwkw of power.

It's still gonna handle at least 300rwkw with the mods you want, and with some top end mods (cams/cam gears/v. springs/port&polish) will be able to make a lot of power.

So you'll save a bit on buying the 25 rather than a 26, and you're not going to be 'disadvantaged' that much with the end result.

Thats my 2c

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...