Jump to content
SAU Community

Recommended Posts

Hey crew,

Just blew the turbo on my car, its the old hpi r32 4door drift car. Most of you would know the car?

It was running a kkr 480, what would be a good upgrade similar to this size turbo? it was running 250kw at the moment on 20psi... rb24 stroker motor. Also wondering if I will have to open up the motor or not as I poured alot of metal out of the cooler and pipes!

Any ideas would be great!

Thanks Joey.

post-25157-1193726152_thumb.jpg

post-25157-1193726391_thumb.jpg

post-25157-1193726566_thumb.jpg

post-25157-1193726764_thumb.jpg

post-25157-1193789053_thumb.jpg

post-25157-1193789107_thumb.jpg

post-25157-1193789133_thumb.jpg

post-25157-1193789155_thumb.jpg

Edited by white32
  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Personally i would be sending the turbo back to KKR and askign how do you explain such a catastrophic turbo failure. I personally woudl carefully rip off the inlet pipe to the throttle body and see if there is any debris in that pipe, up to /around the throttle body..

The intercooler woudl tend to be a reasonably good filter for crap boing through, but fine particles woudl still most likely get through. Perhaps pull the plugs and crank it over for a bit to clear it????

Best consult a trusted mechanic me says... :D

thats rather horrible... i would consider buying another cooler also since its going to be too hard to get all the shards out your current one.

Consider a garret GT3071R IW T3 housing and you'll crank big numbers with better responce

seems to be a few KKR's dropping off....GEN TT just stopped using them also, i hope they can sort out the issues for all the tight asses out there :P im sure it is just one of those things, im pretty sure the oil control issue is sorted now. ive not heard of another failure like this though.

slap on a 3071 or a td06sh-25g

Wow, that is a serious failure right there! Were you doing anything out of the ordinary?

Just floored it in 2nd gear bounched the Bee-R rev limiter once then ka boom!

nO FUN...

Thanks for the replies guys. Will go to local mechanic some time today, on foot god dammit...

Just floored it in 2nd gear bounched the Bee-R rev limiter once then ka boom!

nO FUN...

Thanks for the replies guys. Will go to local mechanic some time today, on foot god dammit...

That explains it... cheap turbo and crazy shaft forces caused by BEE-R rev limiter.......

that doesnt look good!

im running kkr480 turbo aswell, run around about 1.3bar or 19psi daily thru it, but ive noticed mines water cooled and oil cooled..why is all the kkrs ive seen are only oil cooled? hmmmm

that doesnt look good!

im running kkr480 turbo aswell, run around about 1.3bar or 19psi daily thru it, but ive noticed mines water cooled and oil cooled..why is all the kkrs ive seen are only oil cooled? hmmmm

Not sure on that one? You must have got lucky! Good luck with yours, hope it stays together...

post the bits back to them with a thank you card. that is a heap of crap. it looks to me like it failed in part due to the cheap arse materials. I mean look at the way the compressor cover backing plate has just exploded. what a piece of junk.

yeah i think he has got something to do with them in a big way - ever noticed how hpi started pushing all things otomoto?

preety sure he is a member on here aswell and might be able to hook you up cause it dosent look too good having the hpi project car with the turbo that they push have a massive failure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...