Jump to content
SAU Community

Recommended Posts

Spotted a maroon R33 in my work carpark at QEII hospital. Plates were 01 TAD i believe. It had a bodykit - Veilslide i think or something similar, black bonnet, and they had folded in their mirrors :nyaanyaa:

yeah thats me, half the time im going to work at northlakes (f**kn hate that shopping centre lol) dont see many silver 34's around here

check amarts parking lot, you will see my car every weekend :nyaanyaa:

Spotted on Wembly Rd Kingston about 10 mins ago, Black R32 with 2x SAU stickers on the windscreen & some nissan neon thingy in the front bar, no. plates were 820 JDS. I gave a wave, but got nothing back :P

theres actually a 2door 33 that sits in a resaurant car park across the road from jupiters thats the same colour as mine

wen i saw it i was shocked. its a stock grey/blue colour off a nissan bluebird too

and yea i got it from MJR on ferry road, y u ask??

yep thats mine, 2 door ice green.

i actually called into mjr and had a look at that car, the salesman was telling me what a rare colour it was and i replied with "i know, see that 2 door out there, i thought it was the only one in qld in that colour" lol

had mine about 4 years or so, cant remember, its been a long time. theres not many out there in that colour so consider your line unique amongst others :P

Spotted the same one in Mt Gravatt

Hot ride

Must be stolen if it was some black guy that was driving it, I think he's the one that was spotted on my driveway scoping my car...a bottle of metho saw him off in his flogged white 34 that day. :)

Spotted the following today,

8am'ish R33 GTR Gateway Bridge tolls (White, with TE37 Volks didnt get rego)

8:30am'ish R32 GTST M1 towards gold coast (Red/Maroon with plates *** KAB)

9amish R34 GTR carpark at Hope Island Resort (Bayside Blue, looked clean as a whissle)

4pm'ish R31 GTSX dressed as a GTSR (I can tell the difference ;) ) Parked on Queens Rd as Arana Hills

4:30pm'ish R33 GTST Strathpine Sizzler carpark (Looked like Noels car, but had nsw plate DO0170 (Do it, i think its meant to read)

5pm'ish R32 GTR Lilly Rd out the back of clear mountain, think it might have been IanB. Car was going too fast for me to recognise the driver...

I saw alot today :)

yep thats mine, 2 door ice green.

i actually called into mjr and had a look at that car, the salesman was telling me what a rare colour it was and i replied with "i know, see that 2 door out there, i thought it was the only one in qld in that colour" lol

had mine about 4 years or so, cant remember, its been a long time. theres not many out there in that colour so consider your line unique amongst others :)

ive never herd it called ice green until now, i thot it was blue/grey, o well ice green sounds heaps better. i have seen 1 or 2 4doors the same colour but urs is the only 2door ive seen with that paint, it looks mad on the 2door. on the 4door it certainly beats the others which are all painted 2 tone silver/black or blue/black. at least its all one colour. my dad bought it bout 2years ago from mjr so it musta been sitting there for a brave while, what price was on it wen u looked at it?!!

ur car is always parked down there, du work there?

spotted tonnes and tonnes on skyline at POWERCRUISE. im not going to bother mentioning them all.

i was in the white r33 gtst with no front bumper that shat off its crank angle sensor whislt in the middle of a drift :);)

then spotted Kweii r34 gtr heading towards willowbank.

then saw anna and andys r32 at noels house :D ((thanks again noel )

Spotted "ENM13" White 34 GT-T at Browns plains BP... Man I love those wheels... :)

Also spotted "OMR33" on a back street in Browns Plains pulled up outside someones house... :)

I saw a orange 2 door R32 last night near kedron plates are 257ARE ( 2 Stare??) anyways i was in my girlfriends pulsar :'( cos my R32 is getting a bit of crash repair ..... my poor drivers side front corner :)

Also saw a nice R32 black 2 door with black mags with silver trim on the mags.... didnt get the plates... there was a white R33 following him too with gold rims on the rear and plain mags on the front ... on morayfeild road at 1.50pm today (sunday)

ive never herd it called ice green until now, i thot it was blue/grey, o well ice green sounds heaps better. i have seen 1 or 2 4doors the same colour but urs is the only 2door ive seen with that paint, it looks mad on the 2door. on the 4door it certainly beats the others which are all painted 2 tone silver/black or blue/black. at least its all one colour. my dad bought it bout 2years ago from mjr so it musta been sitting there for a brave while, what price was on it wen u looked at it?!!

ur car is always parked down there, du work there?

i work in the highrise thats under construction

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...