Jump to content
SAU Community

Recommended Posts

Brother spotted an R32 GTR on an Army Barracks. He doesn't know to much about the cars but knows what an R35 and R34 GTR looks like haha. He sent me a picture as he didn't know what it was but saw the SAU Sticker on the rear quater window. I'm bringing him around slowly :P

Wasn't just the same one at 3 different points in time? Lol.

There's a delorean that gets around gympie too

Oh course it was at 3 different points in time, for it not to he would of had to of seen 3 in one spot at the same time :rant: lol

Oh course it was at 3 different points in time, for it not to he would of had to of seen 3 in one spot at the same time :rant: lol

You could still see 3 at the one spot and still have them all be the same car. Don't forget that in back to the future marty saw himself in the past. So you could go back or forwards in time and have lunch with yourself....
  • Like 1

So skyline related. Saw 1 x 32, 1 x green 31 red p plater and 3 x 33's on my drive through wynnum manly area today and just before saw a white 32 number plater 70PEK in brighton.

If the plates were HALUCN8 or something like that I know the car, it's mint as :)

Post dig. Went to check out my new motor at All Star Tuning today and stumbled across this car up on the hoist. Getting some nice power mods added it is. Precision turbo also

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...