Jump to content
SAU Community

Recommended Posts

Im thinking about buying an oil cooler for my GTT

But while searching I came across a thread where someone said that it can be bad to run an oil cooler with standard oil pump

no one replied with anything confirming or denying this claim

I was just wondering what ppl opinions would be on this subject

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/
Share on other sites

pfft, some poeple have no idea

just put it in, know one boots there car in the 1st 5 minutes of it running, it take bout 1 minite longer to get to normal working temp.

you wont notice it till you on the track and your oil temp wont go over a surtian temp.....

only install oil pump when your building the bottom end of ur engin and be sure to install a bigger sump.

xoxoxo

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3460681
Share on other sites

Im just a little concerned at my oil temp

cruising around town it sits on about 100

but lately with summer kicking in up here its starting to head up closer to 110 deg with air conditioner on

god forbid I head to the highway

water temp is fine

*this are taken from the factory gauges ,they may or may not be accurate

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461002
Share on other sites

pfft, some poeple have no idea

just put it in, know one boots there car in the 1st 5 minutes of it running, it take bout 1 minite longer to get to normal working temp.

you wont notice it till you on the track and your oil temp wont go over a surtian temp.....

only install oil pump when your building the bottom end of ur engin and be sure to install a bigger sump.

xoxoxo

Just curious, have you had an oil cooler and oil temp gauge?

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461041
Share on other sites

Im just a little concerned at my oil temp

cruising around town it sits on about 100

but lately with summer kicking in up here its starting to head up closer to 110 deg with air conditioner on

god forbid I head to the highway

water temp is fine

*this are taken from the factory gauges ,they may or may not be accurate

water temp and oil temps are related so if ones fine the other should be okay, those temps seems normal i wouldn't worry unless it goes above 125ish.

also the temps should be lower if anything on the highway due to more airflow and less revving.

if you don't do alot of hard driving or trackdays i wouldn't worry about an oil cooler.

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461345
Share on other sites

battery Posted Today, 02:48 PM

just make sure you get a thermostat otherwise it will takes ages to get the engine up to operating temp and/or make the temps to low thus creating wear.

do most kits come with a thermostat or do you usually buy it as an extra, never really heard of a thermostat on an oil cooler

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461548
Share on other sites

Ideally you should have the oil temps close to the water temp again this will be effected by fitted oil coolers and power output etc on different cars.

have to say that 100 seems a bit high for cruising but i have found the factory gauge to not be all the acurate. still 100 is not damaging the oil i believe mineral based oil starts to break down around 125 again depending on the quality of the oil. But again 90 is better than 100, how dark is the oil when changed?

I may be wrong but oil pumps are positive displacement gear pumps so really shouldnt be an issue with a standard pump or after market, unless there is to much restriction in the cooler you use, resulting in oil pressure drop. and thats a bad bad thing!

I run 3 coolers on a standard pump ( well i think it is ) and had no issues yet, long may it continue.

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461556
Share on other sites

Oil cooler is a waste for city driving.

Only a good mod if you hit the track, otherwise there is little benefit.

If you don't ever plan to hit the track then don't bother is my opinion. Quick fix= get oil temp. gauge and that will show you how hot the oil is in summer with air con. running.

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461576
Share on other sites

I never see my oil colour as it get changed by my mechanic

He uses royal purple and tell me that they are a pretty stable oil at high temps

but still In my mind its high

could putting a bigger turbo on it make it rise by 10 degrees its used to sit on around 90degrees with the old turbo

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3462269
Share on other sites

do most kits come with a thermostat or do you usually buy it as an extra, never really heard of a thermostat on an oil cooler

they usually don't come as part of the kit but u can usually get them as an extra.

I never see my oil colour as it get changed by my mechanic

He uses royal purple and tell me that they are a pretty stable oil at high temps

but still In my mind its high

could putting a bigger turbo on it make it rise by 10 degrees its used to sit on around 90degrees with the old turbo

you should make it a habit to check the oil level every so often when filling up.

i usually check the oil and tyres once every two weeks or so.

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3463403
Share on other sites

I've been told it isn't good to have an oil cooler unless it's intense endurance races?

My water temp will sit at 80ºC but my stock oil temp gauge has always sat at 70ºC.

I've been told this isn't good for my engine because the oil isn't warming up enough and can cause wear to the engine?

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3465496
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...