Jump to content
SAU Community

Recommended Posts

Hey,

I've noticed lately that on my drivers side when driving i get this " creeking noise " ? i dont know if its my suspenion or yeah, ive heard that it could be the upper control arm bushes. Im not sure but id like to get rid of it quick.

Thanks heaps.

Edited by ezekiel10
Link to comment
https://www.sau.com.au/forums/topic/194825-skyline-r32-gtst-t-creeking/
Share on other sites

I also have this problem. Both sides from the struts, pretty much only when its cold. Im assuming may have something to do with strut brace? It may be too tight or too loose? Can someone verify please, it is quite annoying.

Could be a worn out shock. Worn out shocks usually make a 'rubbing' 'creaking' noise when going over speed humps.

Like what's said above, probably best to change the bushes while you're at it.

Yeah " NRV155" same with mine when its cold, but yeah ill get on to changing the bushes and hopefully thats it.

Thanks

Ill do the same. If you get it done first, post back and tell me if it fixed the problem. Ill do mine in a couple of weeks.

My r33 has been doing this alot lately, i can hear it the most when turrning the wheel at slow speeds(ie speed humps), and when pulling into a driveway at angle etc....it sounds like the squeel is coming from the rear, but i can hear the front as well.......sound travels though,.....what is this?and will it progressively get worst?

hrmm i got my bushes changed last week (camber,castor) and i have a creeking sound coming from front passenger suspension when i go over speed humps..Never had that problem before i changed the bushes? Any idea on what it could be?

Well, i took my car to the mechanic today to show him and of course the noise wasnt there, not even going over speed humps. He said when it starts again to go straight to him so he can have a look. Until then, ill never know.

Well, i took my car to the mechanic today to show him and of course the noise wasnt there, not even going over speed humps. He said when it starts again to go straight to him so he can have a look. Until then, ill never know.

haha don't you hate it when that happens? You go to show someone to show them what's wrong with the car and the problem never happens.

did camber/castor bushes front, rear camber kit, whiteline swaybars with the associated bushes, new bilsteins means that the eye in the bottom of the shock in the rear wont squeak, it was the bushes/bars that stopped my creaking.

-Ryan

Do urethane bushes squeak?

Basically NO. squeaking is caused by high frequency vibrations that can be heard rather than felt. Usually the cause of squeaking is the incorrect application of grease (not greasing the correct areas eg: flange faces & internal bores), greasing the incorrect areas (outside of bushes designed to be installed inside the suspension component) or even over greasing (applying grease everywhere), however the presence of rust, paint or rubber deposits between the bush and the component or housing can also be a major factor.

check your brake pads..

i had this same "creaking" noise on my R32 but could only hear it at low speeds

turns out it was the fact that my break pads were so lowthat the pistons in the caliper were creaking from having to move so far to engage the pad!

haha don't you hate it when that happens? You go to show someone to show them what's wrong with the car and the problem never happens.

Haha reminds me of my old VN SS. It was an auto and was stalling constantly. So much so, I wouldnt bother driving unless I really had to. Took it to a workshop, they had it all day running and constant driving. No stalling...

Got it back the next day. Stalled constantly and I then sold it to a mate and never had the problem EVER.

(And no, it didnt have a clutch! :thumbsup:)

Back on topic, my car does this too.. only out of my driveway in the morning.. I suppose everyone has to wake up :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...