Jump to content
SAU Community

Modeeeeeeeeeena

grigor

By grigor,
in General Automotive Discussion

 Share

Recommended Posts

grigor Rising Star

grigor

Posted
Posted (edited)

Taking stretch too far

QUOTE:

"This is, believe it or not, the world's first-ever Ferrari stretch limo: a

23-foot 360 Modena with eight seats and the biggest electric gullwing

doors we've ever seen.

It's the handiwork of Style Limousines in Manchester, which spent more

than £200,000 modifying the rear-engined 360.

All eight of the seats are carbon-fibre buckets with five-point race

harnesses - which might sound excessive until you discover that the

3.6-litre V8 remains, its 395bhp propelling the mega-Ferrari to 60mph in

under six seconds. Could prove a challenge not to spill your cheap

champagne.

Those gullwing doors are nine-foot long and were designed by one of the

teams responsible for the Mercedes SLR McLaren.

If you really, really feel the need to see the stretch Ferrari in the

flesh, it'll be debuting at the European Limousine & Chauffeur show this

weekend alongside Europe's biggest stretch Hummer."

post-13483-1196412940_thumb.jpg

Edited by grigor
Link to comment
https://www.sau.com.au/forums/topic/195803-modeeeeeeeeeena/
Share on other sites
SAM916 Mentor

SAM916

Posted
Posted
how the hell do you spend 200,000 pounds sterling modifying it?

quite easily i reckon if all the seats were bucket seats with harnesses, the hour of labour would be massive, then they prob used carbon fibre or some kind of high strenght light wieght material which would cost a fortune....list goes on, it would add up!

i reckon it looks awesome, would be funny to see it do a hotlap of a race track....just don't try and cruise around monaco in it! :P

Link to comment
https://www.sau.com.au/forums/topic/195803-modeeeeeeeeeena/#findComment-3507149
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • wizlb
      Flex Fuel Kit Workshop

      By wizlb · Posted

      Thanks Dose.....    I appreciate it!!
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • Piggaz
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By Piggaz · Posted

      I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...