Jump to content
SAU Community

Recommended Posts

Hey ive got a 1997 R33, and I want to change the stock speakers. I want a simple set up without subs which has atleast abit of decent bass. Ive thought about 6x9's but seems to be more trouble then its worth to do it right. So do any 6.5 inch speakers provide decent bass????

Sorry i'll elaborate im talking doors and parcel shelf. I dont want subs cause I enjoy my boot space. So im looking for a good combination that incorporates clarity and as much quality bass as possible.

Boston Accoustics Pro series....Not cheap but can handle a lot ! Top quality stuff.I watched oneday in store as a sales rep put a 12 inch sub on the floor facing up.He then put one foot on the cone of the sub...And then stood on it ! With shoes on...They really are a tough woofer...!

Boston Accoustics Pro series....Not cheap but can handle a lot ! Top quality stuff.I watched oneday in store as a sales rep put a 12 inch sub on the floor facing up.He then put one foot on the cone of the sub...And then stood on it ! With shoes on...They really are a tough woofer...!

i can vouch for that. (see sig) boston pro series are fantastic. not cheap (around 1100 for the set) but well worth the money.

you can get 6.5" subs...

indeed. there is a product called the QMAX invissibass. its a 6.5" sub in its own ported enclosure.. goes well...

6.5 inch subs hmm interesting. Was having a read and cant find a pic of this invisibass but I dont think it would be able to be screwed into my parcel shelf because its already enclosed.

Edited by LatinR33

get a pair of kicker 8" subs on your parcel shelf, 6.5" splits in the front doors and fit some 6.5" splits either on the parcel shelf or in the rear quarter trims... had full sub enclosure in my boot and didn't get the full effect due to skylines havin the firewall in the rear

My suggestion would be is get some quality front splits. Amp them, deaden and seal the doors. Leave it at that. If thats not enough, then go to as mentioned above some 6.5inch subs. Get 2 put them in the rear stock speaker location.

That said there are some slimline subs, and with a good install you wont loose too much boot space. Not that R33s really have a boot to start with :(

Boston Pro's in the doors.THen I would put one 10 inch Boston Pro in the boot.Bostons really dont require a large enclosure.I was told they can be installed in like 1.5 cubic feet enclosure...? A good quality installer can make,install a box and trim it so it looks like it was designed there by factory and still have heaps of bootspace.As for fitting 2 subs..? What for ? these days subs handle so much power...one is all you need.I believe the Boston PRo 10 and 12 can handle in excess of 1000 watts...?? More than you will ever need

  • 2 weeks later...

6.5" In front ... forget the rears. (unless you have too much money) ... #1 rule is get them installed properly. You can spend a few hundred dollars or a few thousand dollars. If there not installed right there going to sound shit!

6x9s does NOT equal bass.

If the 6.5" are installed well then they can produce surpising amounts of bass (providing the speakers aren't complete rubbish ie the factory ones :banana:).

As for the boot space...

Here's a GTR setup (small boot anyway) ... which produces stupid amounts of bass and doesn't eat up too much boot space.

subwoofer_in_situ_1.jpg

I've currently running a rockford sub (which is pretty cheap wholesale and requires 0.8cuFeet sealed which is really small).

But getting back on topic

Here's what a really bassy 6.5" front door looks like:

door_ps_complete_1.jpg

6.5" In front ... forget the rears. (unless you have too much money) ... #1 rule is get them installed properly. You can spend a few hundred dollars or a few thousand dollars. If there not installed right there going to sound shit!

6x9s does NOT equal bass.

If the 6.5" are installed well then they can produce surpising amounts of bass (providing the speakers aren't complete rubbish ie the factory ones :happy: ).

As for the boot space...

Here's a GTR setup (small boot anyway) ... which produces stupid amounts of bass and doesn't eat up too much boot space.

very nice install....can I enquire as to who did the install ?

very few do jobs that neat

subwoofer_in_situ_1.jpg

I've currently running a rockford sub (which is pretty cheap wholesale and requires 0.8cuFeet sealed which is really small).

But getting back on topic

Here's what a really bassy 6.5" front door looks like:

door_ps_complete_1.jpg

6x9s does NOT equal bass.

If the 6.5" are installed well then they can produce surpising amounts of bass (providing the speakers aren't complete rubbish ie the factory ones :)).

As for the boot space...

Here's a GTR setup (small boot anyway) ... which produces stupid amounts of bass and doesn't eat up too much boot space.

There are some good articles on sound-deadening doors somewhere on the forum.

Nice install, I'm curious about the difference between going for the area where the battery is normally located and the side-of the boot as you have installed.

I'm assuming the bass would sound quite different depending on the install location?

Has anyone tested how the different installs sound?

I assume that the back of the car only fits a very small sub, 10inch?

Xizor, excellent point. I'm just thinking that if its placed behind that firewall facing the rear of the boot compared to sitting on the side of the car facing the other side of the boot.

Once has more room (across the boot), but will it sound different?

I'm curious if other people have tried both installs, I'm sure some of the shops have experimented.

For a decent sounding 6.5 that doesnt cost too much try an MTX TX6001. They are 6.5" components. You wouldnt need to run them of a smallish 2ch amp tho as ur head unit wont run them to even halfway close to their capacity for quality and sound volume. Or run those up front and run the coaxial version (not splits) at the rear - TDX6502, and run all four off a four channel amplifier. If you can fit a set of 6x9s in the rear you can get a lot of bass out of them, just look for something with a decent RMS power rating. Again, there is no point running these off a head unit. Depending on your budget, id look for a set of JBL GTO series speakers, ur looking at about $120-130 and sound great for the money. Nice and clear and deep. They do good splits too, for about $180. GTO937 are ur 6x9s, GTO607C are the splits.

Your best bet is to go into a store and listen to a few different ones. Dont worry about power ratings or shit like that, just shut ur eyes and flick through a few and pick what SOUNDS nice. Sounds gay, but you only buy em once, they are hidden once theyre installed, so who cares what brand and what they look like.

IMHO only! I know there are dfferent brands out there but theyre just a couple ive had really good remarks and feedback about, especially for the cash.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...