Jump to content
SAU Community

Recommended Posts

hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/
Share on other sites

hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

Mate!! all these people telling you turbo's overheat, and blowup and arent reliable etc. dont know how to treat a car!!!

My R31 skyline was a bolt on turbo setup with nice size cooler, 10psi making 165rwkw, I tuned it backin 2003 I think and it did not miss a beat for a good 5 years untill I sold it!!!!

I drove that car in 40 degree heat with a full car load goin for cruises, to the beach etc. 40 mins drives at a time.

- it did not overheat!

- it did not blow up

- it was very relible!!

do your service every 5000k's, make sure your cooling system is working correctly and you shouldn't have any problems at all....

If you do donuts for 10 or so mins straight..... any engine will overheat!!!!

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527539
Share on other sites

hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

:bunny: with friends like these who needs enemies...

Best piece of advice anyone can give you is dont rush into buying the first car you see, get it checked out and spend sometime looking at EVERYTHING for yourself. If you are in over your head then get the help from a professional (mechanic or friend) and be prepared to spend a little money doing so.

My 2cents is id rather spend $100-200 on a car to find any minor/major problems first than take a punt and having it end up costing you $$$$$$$$$

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527579
Share on other sites

when I bought my Skyline I knew the HKS turbo was on its way out so I got it a little cheaper.However that turbo lasted almost 2 yrs before the telltale waft of smoke while sitting at the lights.I had it fully rebuilt for just under a grand..ran beautiful...Just make sure oil changes are regular and you will have years of trouble free motoring.Dont believe all that crap that you have been told

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527615
Share on other sites

My 33gtst has just ticked over the 100000 (and the rest :bunny: ) and is still on the stock turbo which has had 10 pounds of hard abuse shoved down her throat for 4 years. And i still havent blown... Wait, am i still even talking bout cars here?

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527675
Share on other sites

My R34 GTT has:

Done the trip from Brisbane to Sydney in a day. No issues. Just spent a minute longer cooling down the engine before switching it off.

Plenty of >3hour trips.

Does 2 >1hour trips on a daily basis. Hasn't missed a beat.

Use decent oils and regular maintenance and these cars will out last most cars on the road.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527847
Share on other sites

Skyline's aren't a cheap car to run by any means.. Maintenance, insurance and running costs are all higher than normal every day cars. If cheap motoring is what you're after look elsewhere. Having said that, Skyline's will be reliable if you look after them as said previously.

The stuff that you've posted is an absolute load of crap. Maybe that sort of stuff is true if you are using your car for drags / track / drift events twice a week, lol.

Over-heating on long trips lol..

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527928
Share on other sites

One thing people haven't mentioned here is that boost levels can effect the lifespan of the turbo. Standard ceramic wheeled GTR turbos (non R34 N1) shouldn't be boosted above 15psi or 1 Bar (although there are plenty of people who have and haven't had any problems... yet). I don't know about GTS-T turbos but I imagine they have a common boost break point as well.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3528647
Share on other sites

Use decent oils and regular maintenance and these cars will out last most cars on the road.

i agree with this wholly. skylines are made to cop a belting and will ask for more. you just have to keep high maintenance.

make sure you keep everything under/at it's limits and the car with run fine under most if not all conditions and situations..

eg: if you've got a stock fuel system and bolt on a huge turbo without a tune, you will come across problems eventually. you have to mod everything in consideration. if you go for a long drive you should make sure your turbo cools down before switching the car off. this site is a huge resource for that sort of stuff!

as DRD-00F said, GTS-t's are safe at 12psi. make sure you have an aftermarket boost guage to monitor this.

hope that helps! :D

Edited by dmr
Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3528773
Share on other sites

My 33gtst has just ticked over the 100000 (and the rest :( ) and is still on the stock turbo which has had 10 pounds of hard abuse shoved down her throat for 4 years. And i still havent blown... Wait, am i still even talking bout cars here?

hahaha... hamish u crack me up!

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3529025
Share on other sites

I see what's happened here..

Your mates have obviously confused the word TURBO with the word ROTARY.

I beg to Differ.

My old Series 3 Rx7 had 230,000ks on the original motor....never missed a beat.

Even drove it from Melb to the Gold Coast In December and Ran beatifully :)

Look after any car and you wont have any worries with it.

Preventative mantinence. Making sure nothing can go wrong is a lot easier than fixing somthing when it does.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3543681
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hmm makes things tricky then.  I can't in good faith say, go forth my child and weld in whatever metal you remove in your quest for rust. I very strongly expect that adventure will end in sadness.  But you can't leave the car as it is, you literally have a hole in the roof. Also, I know you think the rust doesn't go much further, but the more I look at those photos, I really think the rust does in fact go much much further.  If you are 100% committed to being the only person working on the car.... stop where you are, hit it with rust converter, fiberglass, body filler, paint work, pretend you never discovered the rust in the first place?  Even if the body was repaired, painting the roof is a pain. Were you planning to use rattle cans to paint the roof?
    • Ok so I will not defend my naivety. I regularly feel like things look easier than they are.  As much as I'd love to, buying another vehicle is out of the question. It was hard to get this car through the family process and we just don't have the room.
    • If your current chain of thought is, I'll go somewhere like pick and payless (or equivalent) and causally remove the bit of roof with your BYO grinder then casually weld that into your car... oof. It might sound easy but you will 100% end up with a warped roof. You say you'd prefer some ugly fab work, but I don't know if your prepared for how ugly this will be lol.  I've seen professional welders do similar but easier repairs and still end up with warped panels.  It is reasonable to assume that from your current skill level, you won't be able to do this cut and paste job while keeping flat panels.  Ok, but we are here to learn. This might be the go... jump on car sales, sort by price, buy the cheapest thing with rego and drive it home. This is your new practice vehicle. If you're thinking of doing the cut and paste job, try it on this car. Cut out the panel (hey it's a perfect fit) weld in the panel. See what you think of the results.  Next thing you could try, practice removing the entire roof in one piece by drilling out all the spot welds etc. Have a crack and welding the roof back on.   
    • I've never welded but I own a welder and I've always wanted to learn. In fact I had already looked at a 1 day welding course in Sydney.  I'd prefer some ugly metal fab than anything weak.  I'm challenging myself a lot with this car. For so many years I've just paid other people to do things and I've always been keen to learn and get better.
    • Ok, thats a good starting point.  So before we start.... do you mind if the car say isn't a strong as it was before? My first thought is go excavating for rust. You'll be left with a gaping hole, that will be filled with fiberglass. You could make it look factory pretty easily but yeah, if you never crash it will never be an issue right? Before we look at other options, how confident are you welding? 
×
×
  • Create New...