Jump to content
SAU Community

Turbos

bjpeters

By bjpeters,
in General Automotive Discussion

 Share

Recommended Posts

bjpeters Rookie

bjpeters

Posted
Posted

hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/
Share on other sites
FULOCK Collaborator

FULOCK

Posted
Posted
hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

Mate!! all these people telling you turbo's overheat, and blowup and arent reliable etc. dont know how to treat a car!!!

My R31 skyline was a bolt on turbo setup with nice size cooler, 10psi making 165rwkw, I tuned it backin 2003 I think and it did not miss a beat for a good 5 years untill I sold it!!!!

I drove that car in 40 degree heat with a full car load goin for cruises, to the beach etc. 40 mins drives at a time.

- it did not overheat!

- it did not blow up

- it was very relible!!

do your service every 5000k's, make sure your cooling system is working correctly and you shouldn't have any problems at all....

If you do donuts for 10 or so mins straight..... any engine will overheat!!!!

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527539
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
Posted
hi everyone, just a newbe question. i am looking into buy a turbo skyline but im not sure if it is going to be worth the hassle of having a turbo. i hear they need to be rebuilt every 60,000 kms costing 2grand, aren't good and overheat on long trips (which i frequently do) and if they do blow up the stuff the whole engine! are these things true? has any 1 had major issues with their turbos, or is a matter if you look after it right everyting will be good? what is a good amount of kms to buy a 2nd hand gts-t?

:bunny: with friends like these who needs enemies...

Best piece of advice anyone can give you is dont rush into buying the first car you see, get it checked out and spend sometime looking at EVERYTHING for yourself. If you are in over your head then get the help from a professional (mechanic or friend) and be prepared to spend a little money doing so.

My 2cents is id rather spend $100-200 on a car to find any minor/major problems first than take a punt and having it end up costing you $$$$$$$$$

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527579
Share on other sites
GTR-32U Mentor

GTR-32U

Posted
Posted

when I bought my Skyline I knew the HKS turbo was on its way out so I got it a little cheaper.However that turbo lasted almost 2 yrs before the telltale waft of smoke while sitting at the lights.I had it fully rebuilt for just under a grand..ran beautiful...Just make sure oil changes are regular and you will have years of trouble free motoring.Dont believe all that crap that you have been told

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527615
Share on other sites
joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

My 33gtst has just ticked over the 100000 (and the rest :bunny: ) and is still on the stock turbo which has had 10 pounds of hard abuse shoved down her throat for 4 years. And i still havent blown... Wait, am i still even talking bout cars here?

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527675
Share on other sites
HackerX Community Regular

HackerX

Posted
Posted

My R34 GTT has:

Done the trip from Brisbane to Sydney in a day. No issues. Just spent a minute longer cooling down the engine before switching it off.

Plenty of >3hour trips.

Does 2 >1hour trips on a daily basis. Hasn't missed a beat.

Use decent oils and regular maintenance and these cars will out last most cars on the road.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527847
Share on other sites
Simmo1985 Community Regular

Simmo1985

Posted
Posted

Skyline's aren't a cheap car to run by any means.. Maintenance, insurance and running costs are all higher than normal every day cars. If cheap motoring is what you're after look elsewhere. Having said that, Skyline's will be reliable if you look after them as said previously.

The stuff that you've posted is an absolute load of crap. Maybe that sort of stuff is true if you are using your car for drags / track / drift events twice a week, lol.

Over-heating on long trips lol..

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3527928
Share on other sites
writeoff Mentor

writeoff

Posted
Posted

One thing people haven't mentioned here is that boost levels can effect the lifespan of the turbo. Standard ceramic wheeled GTR turbos (non R34 N1) shouldn't be boosted above 15psi or 1 Bar (although there are plenty of people who have and haven't had any problems... yet). I don't know about GTS-T turbos but I imagine they have a common boost break point as well.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3528647
Share on other sites
dmr Mentor

dmr

Posted
Posted (edited)
Use decent oils and regular maintenance and these cars will out last most cars on the road.

i agree with this wholly. skylines are made to cop a belting and will ask for more. you just have to keep high maintenance.

make sure you keep everything under/at it's limits and the car with run fine under most if not all conditions and situations..

eg: if you've got a stock fuel system and bolt on a huge turbo without a tune, you will come across problems eventually. you have to mod everything in consideration. if you go for a long drive you should make sure your turbo cools down before switching the car off. this site is a huge resource for that sort of stuff!

as DRD-00F said, GTS-t's are safe at 12psi. make sure you have an aftermarket boost guage to monitor this.

hope that helps! :D

Edited by dmr
Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3528773
Share on other sites
Gazzilla Experienced

Gazzilla

Posted
Posted
My 33gtst has just ticked over the 100000 (and the rest :( ) and is still on the stock turbo which has had 10 pounds of hard abuse shoved down her throat for 4 years. And i still havent blown... Wait, am i still even talking bout cars here?

hahaha... hamish u crack me up!

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3529025
Share on other sites
zebra Grand Master

zebra

Posted
Posted
I see what's happened here..

Your mates have obviously confused the word TURBO with the word ROTARY.

I beg to Differ.

My old Series 3 Rx7 had 230,000ks on the original motor....never missed a beat.

Even drove it from Melb to the Gold Coast In December and Ran beatifully :)

Look after any car and you wont have any worries with it.

Preventative mantinence. Making sure nothing can go wrong is a lot easier than fixing somthing when it does.

Link to comment
https://www.sau.com.au/forums/topic/197277-turbos/#findComment-3543681
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
×
×
  • Create New...