Jump to content
SAU Community

Recommended Posts

Hey fellas,

As most of us know, R33's stall as hell when there's a atmospheric installed - it plays with the airflow meter, mixtures and ecu settings etc which caused really bad stalling issues... I've put back my stock BOV, but I miss the nice pod-suction sound heaps and also the Sshhhhttt sound - driving a turbo without this sound really is a bit of a let-down.

I've heard though, if I get a BOV which has 2 sides - one that plumbs back and the other that vents out - I'll still satisfy the requirements of the car and will also get the nice blow-off sound.

Which ones would do the above - any suggestions, fellas?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/197754-best-plumb-back-bov/
Share on other sites

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

GFB Hybrid bov does exactly what you asked for.

I've got one, but ive got mine plumbed back entirely. I dont like the pssshht lol. I used to have it 50/50 plumbed and atmo. The car stalled a few times over months it was like this, usually under hard braking.

GFB Hybrid bov does exactly what you asked for.

I've got one, but ive got mine plumbed back entirely. I dont like the pssshht lol. I used to have it 50/50 plumbed and atmo. The car stalled a few times over months it was like this, usually under hard braking.

I love the pppssshhhhtttt sound. lol

I hate it when the car stalls if full atmo, so I'll go 50/50 then... yeah, was also thinking of the GFB Stealth FX BOV... sounds nice and also heard some times it doesn't stall on R33's... what can you do though.. ha ha ha

Thanks.

I wonder why everyone's going back to stock - is there a reason for this?

Just keep the stock man, you can't go wrong!

I used a SSQ for like 10 minutes, then blocked the stock BOV off..

1 week later and I unblocked it all and had it running normal.. you don't realize how smooth and nice it runs with the stock plumb back setup until you change it :P

The stalling, lag between gears, its just annoying.

My opinion anyways.

Edited by abu
Just keep the stock man, you can't go wrong!

I used a SSQ for like 10 minutes, then blocked the stock BOV off..

1 week later and I unblocked it all and had it running normal.. you don't realize how smooth and nice it runs with the stock plumb back setup until you change it :P

The stalling, lag between gears, its just annoying.

My opinion anyways.

Wow, thanks for the heads up mate... but I love the Ssshhhtttt sound... damn it... really love that sound... but I know what you mean buddy.... I know perfectly what you're referring to... stock does make the car run much smoother - not to mention no more stalling which is a pain in the arse... thanks mate...

If done right, would the GFB work just as well if no lag?

Cheers,

any bov will not stall if you tighten it up a lot. my line was imported with hks ssqv and never stalled. about 6 months in everyone i knew was getting pulled over so i changed to an r34 gtt bov, which is the same as a gtst, and can still hear turbo noises to make me love driving the car, but dont have to worry about getting into trouble lol. its a stupid thing to be defected for, especially when the original equipment is so good

i guess if you really like the sound then in the end its your call. i drove a rex with one and after a day of driving i was over the sound..ha. negatives outweigh the positives in my books so i stuck with the stocker. i still get the pshh sound with my arc box, just not as loud though.

i was wondering if u do get something like gfb stealth fx and tune it for full atmo

and sometimes you decide to adjust it so its full plumbback how this would affect the car?

if u did this, when the car was running a full plumb back when its tuned for atmo, ud be running your engine really lean and could cause engine damage.

And how exactly do you tune a car with an AFM to run an atmo BOV?

with an safc, the DecAir settings. on a full aftermakert ecu with a deceleration enrichment/enleanment correction map (what its called can vary from ecu to ecu).

any bov will not stall if you tighten it up a lot. my line was imported with hks ssqv and never stalled. about 6 months in everyone i knew was getting pulled over so i changed to an r34 gtt bov, which is the same as a gtst, and can still hear turbo noises to make me love driving the car, but dont have to worry about getting into trouble lol. its a stupid thing to be defected for, especially when the original equipment is so good

Yeah I know what you mean... is the 'original' stuff that good? sounds good... I gotta say, the stock one doesn't stall is that's a first...

But I really miss the nice tough suction sound and the ssshhhtttt let off sound.... how the heck can I modify the original to give off more sound whilst not stalling the damn car? :)

I heard blocking the hole spools up faster but will crash the car.

the only reason ur car stalls wen its at full atmo is because u havnt tuned it to have a fulla tmo BOV. i run a atmo bov all day every day and it never stalls ever.

I'm going to install a emanage - do you think the BOV can be tuned to work fine without no more stalling?

Thanks.

^^ Nah he's serious, have a read of his other threads. *shakes head*

Thien, you cant get the sound of venting to atmosphere without the problems that come along with it, unless you change over to an ecu that does not use an AFM.

ive had no probs with my vta hks ssq.

stock ecu and management.

it actually has increased response.

lol and for some reason i gained 0.3hp (yay).

so apart from the pssscchhhhttt sound man. there is no real benefit of going vta. just means when u accellerate u get that at times unwanted effect and the attention that comes with it.

im sure there has to be atleast 1 1000hp+ car out there that runs a plumb back bov... surely?

Edited by r33cruiser

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...