Jump to content
SAU Community

Recommended Posts

as the topic says, whilst removing my stock dump pipe the passenger side top bolt snapped, with the thread stuck in the turbo side. the other 5 bolts were all ok, and sprayed in wd40 beforehand but this top bolt was very brittle and snapped.

my new single piece dump/front pipe is bolted up, but i now have a big exhaust leak between the turbo and the dump, at the top because there is no bolt to hold it together. i can feel a fair amount of air leaking at idle if i put my hand there.

i've been told my turbo will have to be removed to get this broken bolt out. can anyone recommend a place where i should take it in perth, to fix this properly for good? anyone got an idea what i should be paying for this labour, so i don't get ripped? any help is appreciated.

cheers,

Chris.

Link to comment
https://www.sau.com.au/forums/topic/19780-help-dump-turbo-bolt-snapped/
Share on other sites

Man - not good. Boo to rusted brittle studs!

Pulling the turbo out isn't an impossible job - Zanda and I managed it on his car ok. Once you have it out you could try what is called an "easy out". Basically you drill a pilot hole into the offending stud and bash this "easy out" thing in with a hammer and then use it to turn out the remaining thread.

If you're not confident doing that then a workshop is definitely the go but it's gonna cost a fair amount of coin because of the labour time involved.

Good luck either way man...

  • 5 years later...

i too got a broken bolt on the turbo-to-front pipe.. :(

and it wasnt evan me who broke it..

anyways i blew my turbo yesterday..

well not blew..no smoke and i can still drive...

just really really loud bearing noise...lol

i didnt get the car home, till lik 6ish..

and i started removing intake pipe, heat shield etc.. straight away...

i got the 2 top nuts off the turbo that hold it to the manifold..

and 3 that are on the side that hold the exhaust/front pipe..

but my mate decide to have ago..and he broke one..

anyways..i was thinking about drilling it out while the turbo is still in place..

would this b a good idea??

i believe i can get a drill in there..

but any ideas or tips would b great

im getting another turbo put back on so...aslong as i dont destroy the front pipe..i should b ok..

oh yeah..is there any real good removal help guide for turbos for rb25det or fitting guides that anybody knows off?

bit of a tight fit to drill

unless you have a right angle drill?

also since the turbos bust, why not just remove it?

is it possible to weld a nut onto it then remove it?

mate did with snapped studs in the head

well i got if off...

i got another topic on this,..a separate topic on..coz the main problem was the turbo was whining...

and it still is..

anyways..

i got new gaskets today..so im trying that,,,

but this turbo i fitted..a series 1 r33 turbo...

had a snap stud in the corner..lol

and ther person has tried to drill it out twice..but couldn't get it out..

its fitted to the car already..

a mate from work recons i should have drill it out completely and put a bolt and nut on it instead of just leaving it..

plus put the new gasket on with exhuast(copper colour type) sealant..thats sensor safe..

i also got told to do this by a turbo place MQT in perth..just on the bell-mouth/dump side only...

is there a easier way to get those 2 bottom nuts on the dump/turbo wen the turbo is on the car???

i had to remove the 3 dump/front pipe bolts and coz i couldn't get to the 2 nuts wen i took my turbo the first time...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...