Jump to content
SAU Community

Import A New Gtr Now

THE_350GT

By THE_350GT,
in R35 GTR

 Share

Recommended Posts

ras1983 Experienced

ras1983

Posted
Posted

Can you get compliance if Nissan Australia is going to officially import and sell the car? I was under the impression that if a car is sold through a local arm of a car manufacturer then that model couldn't be imported unless it was a personal import.

Maybe thats why the car in question is not available for street use.

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

you can import cars not sold here as long as they are on the SEVS list (meet certain requirements, basically, power/weight ratio) and they weren't sold here AT THE SAME TIME. The Rx-7, S15 were both sold here but can also be imported as long as you choose a year that they weren't here OFFICIALLY. As we won't be getting the GTR until 2009, that leaves any 07/08 GTR eligible for import... BUT

Nissan OZ seem to be making quite sure there is not going to be a market for this car, so don't expect any "grey" GTR's to make it here for road use

Laurence Mentor

Laurence

Posted
Posted (edited)
how are they making sure theres donna be no market for it exactly?

I suspect the first Australian market one will be "sold" very soon... it is probably here already :laugh:

Well that is what I would do if I was Nissan Oz.

Edited by Laurence

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Roy
      A Boy's Love For His Rb20

      By Roy · Posted

      Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • Roy
      A Boy's Love For His Rb20

      By Roy · Posted

      So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • joshuaho96
      HR34 GT speedo issue

      By joshuaho96 · Posted

      Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Dylannn
      WTB RB25 Gearbox NSW / central west

      By Dylannn · Posted

      Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • SeanR32GtSt
      Hypergear Turbochargers and High flow Services Development thread

      By SeanR32GtSt · Posted

      Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...