Jump to content
SAU Community

Recommended Posts

not me, all stations work perfect :dry:

but mine was installed by the dealer i bought the car from before i picked it up so i have no idea what they used...

Could you ask what sort of expander your dealer used or who they used to install it ? cause my one is f**ked it getting shithouse reception.

The expander was installed by Chris. he changed it the other day but still it fuzzy so i thought maybe it just the car's antena.

so this is the same one that wazz has in his car (with the perfect reception)?

if so it must have to be the 2 antennas causing the sh$t reception.

this dual antenna setup has never caused this problem before in my previous r32 and r33,so whats the deal?

i can drive over the harbour bridge anyday of the week and ONLY get 96.9 (nova) all other stations are roooted

there must be somthing wrong here with our cars/band expanders ....2 day fm and triple m easily have a stronger broadcast than nova 96.9....

to be honest I have used that unit on every other 35 I have done and it worked fine. some of them are more sensitive that others so thats what I put it down to.

so this is the same one that wazz has in his car (with the perfect reception)?

if so it must have to be the 2 antennas causing the sh$t reception.

this dual antenna setup has never caused this problem before in my previous r32 and r33,so whats the deal?

Yeh that was what i was told iam still getting shit reception in Brisbane CBD ? so go figure who know ? it really pissing me off

How does this expander really works?

Eg converting the japanese 14 band wide 76 - 90 Mhz to suit intl 20 band wide 88-108 Mhz...

so if I want to listen to aussie's 101.1FM in Melbourne, on a std V35 japanese stereo I should tune so the display on the radio shows:

101.1 Mhz - base range 88 Mhz = 13.1 Mhz X 14/20 band converter = 9.17 Mhz + jap's base 76 Mhz = 85.17 Mhz or showing 86.15Mhz on the japanese radio

if it supports .05 fine tuning, or if not tune the japanese radio to 86.2 Mhz.

Is that how it works?

Managed to try 1 station, 101.1 Mhz Mix FM in Melbourne = 85.1Mhz on the Bose factory audio.

Tried to get 101.9 Mhz Fox FM, but nothing was heard on 85.9Mhz :-(

Will try again once I got the car started... the jump start cable wasn't long enough for bad position in the garage.

Managed to try 1 station, 101.1 Mhz Mix FM in Melbourne = 85.1Mhz on the Bose factory audio.

Tried to get 101.9 Mhz Fox FM, but nothing was heard on 85.9Mhz :-(

Will try again once I got the car started... the jump start cable wasn't long enough for bad position in the garage.

Had the band expander installed in Sydney last Monday. Worked great while I was there, got Nova 96.9, 104.9 and 106.5 easily, good clear signal although I was warned that reception can be fuzzy going through tunnel (which I did not get to try). Works great here in Canberra as well but I needed to manually tune the stations rather than using the auto seek function.

Installed by the mob where I got my car. It was part of the deal when I got the car so I don't really know how much they charge. Anyone interested should just talk to Chris or Bettina at 02 9542 4280. They're in Kirrawee. The guy who installed it took about 40 min., he didn't even have to take down the whole dash or pull out the head unit.

As far as I know they use the PB2000 expander which from what I can get from the net, has a built in booster. Works by expanding 10 and 20 Mhz. Weird set up, for stations below 100, subtract 10 to get the japanese dial. So for Nova 96.9, Bose radio would show 86.9. To get stations over 100, subtract 20 so 104.9 shows 84.9 on the dial. The expander does this automatically. Problem occurs if there is a double up, say there is a live station on both 96.9 and 106.9. Since 96.9 is below 100, it would normally be 86.9 on the dial which is the same as 106.9 (106.9-20 = 86.9). Rare, but it can happen, I think in this case you won't get any clear signal from both stations.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...