Jump to content
SAU Community

Auto Barn

Adz2332

By Adz2332,
in South Australia

 Share

Recommended Posts

STATUS Grand Master

STATUS

Posted
Posted
It's not suspension but my mate bought some speakers from autobahn for his 04 WRX and he told the chick what speakers he needed but she assured him that he needed different ones. They were top of the line Alpine's i think and when he got em home, guess what, they didn't fit! He took em back and explained that she was wrong and stuff and then she was like "Oh, you meant for a 04 WRX, I thought you said a 98 WRX". THICK AS! The ones he needed were a different price and he refused to pay that price because she stuffed up, the ones he needed weren't on special like the other ones. She was like but I'll get in trouble with my manager and my mate was like well you should have done your job right the first time and we wouldn't have had this problem, DUH! So, he ended up getting top of the range Alpine speakers that were meant to be close to $300 for under $100, haha suckers! Good luck with your suspension though mate, hopefully you know not to use them next time.

hahahaha autobarn SA dont sell alpine... only cartoys and tonkins do.

STATUS Grand Master

STATUS

Posted
Posted
+1 ring Ryan i run ISC coils and am very happy with the product and Ryans service is second to none

ISC are just cheap crap like K-sport D2 etc for a few measly dollars more you could do so much better... like bilstein, greddy type-S (with come with free electronic damper control now), or tein.

just out of interest (i no longer work for autobarn HO anymore) but which store did you have issues with? PM Me if you like.

STATUS Grand Master

STATUS

Posted
Posted
correct they dont sell alpine... :)

why would they want to? every one in the trade knows it is pushed to buyers only to make the most money (it has the highest mark up of all audio brands) how does this benefit the customer? ;)

PSYKO Enthusiast

PSYKO

Posted
Posted

everyone is quick to bag autobarn, i happen to manage one of there stores, boys down where we are no there stuff. they don't just specialise in 'skylines' , we have to deal with every type of car on the market, hence we don't no every minor detail concerning skylines or what not. there's no real listings for parts on most import which makes some things difficult to find! your focus should be on the suppliers of parts to autobarn as they don't supply adequate information.

this does exclude the majority of some autobarns and there workers as i myself have had useless help from some, but just an opinion from the other side!

J_Red33 Experienced

J_Red33

Posted
Posted (edited)

I do actually go to the Autobarn down Noarlunga a bit myself & a few of the guys down there know their stuff, just a matter of who you get. As Psyko says it is a general automotive store so it can be a bit hard to remember everything for every car. There will always be people stuff up no matter where u go.

I've generally had better experiences with them than say places like Sprint, or Repco etc. which are their main competition.

Having said that I've never bought any major performance parts from them purely because they're generally a bit pricey for that gear.

Edited by J_Red33
Krishy Grand Master

Krishy

Posted
Posted

i have never had a problem with autobarn.....i got my intercooler from there and they were late by a week so i gave them the hurry up as the hot weather was apporaching and i got a VSPL for the price of their M spec coolers...

(OO)Firty Free(OO) Rising Star

(OO)Firty Free(OO)

Posted
Posted
yeah the M specs are bar and plate and go for $600-700 and the VSPL go for about $1200 so i aint complaining and it was the Gillies plains one

+1 for Gilles Plains store bought my cooler from there and was impressed with both service and price.Used to travel to Mile End before Gilles opened.Plus they got all the good oils etc when the 5k service comes around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...