Jump to content
SAU Community

Recommended Posts

I'm heading out to my first circuit practice this weekend and i'm after a bit of advice.

I have an r32gtst with an rb30 twin cam making 254rwkw's @ 14psi.

The important things to note for the track is:

i have an aftermarket radiator

no oil cooler (purchasing one soon)

good street tires (getting semi slicks soon)

catch can made by myself (fully sealed with a little filter on top and x4 1/8th holes)

standard 4 spot brakes (am upgrading discs, fluid and pads after the track day) will do 1 hard and 1 cool down lap

i have a helmet, fire extinguisher and appropriate clothing

the car is being towed, not driven

A few bits of info i'm after is:

-i sometimes get oil leakage around my catch can, is this because the catch can is under so much pressure that its venting (note that i'm not getting heaps of oil in my catch can, 100ml max) should i drill some more holes to stop this?

-what tire pressure is recommended?

-due to the fact that i don't have an oil cooler or an oil temp guage is there a stock

-i have heaps of tools, what are the things i should make sure i take?

-i've heard you should put more oil in than normal but how much more?

Cheers!

Oil catch cans should have an inlet, and an outlet, the putlet either goes back to the intake air pipe or vents to atmo... without the outlet, the can will pressurise

tyre press for street tyres.. start with 34 psi and see how the car feels

oil temps - assuming your going to mallala, do 1 warm up lap, 2 flying laps, 1 cool down lap, then two flying laps, cool down, etc etc duntil the session is over.

tools - cable ties, race tape, socket set, side cutters, 1/4 drive socket set, hammer, plyars and some stainless steel cable ties, this is what i usually take. along with spare hoseclamps and assorted consumables, pays to take water and oil too.

you can overfil the sump by an extra half a L.

have fun!

Edited by Simon-R32

The track day is this Ssaturday, so I assume it's because he's run out of time.

Ash: What brake pads have you got? You really should go get something decent before going out there, or at least take a spare set, Mallala does go through pads a fair bit. Try get some Lucas pads, they're pretty decent and only cost around the $50 mark.

Take plenty of water to drink for yourself too, it's very draining...

Edited by salad

I wouldnt be going on the track untill i had the oil cooler installed - the weather is far too hot to risk it at the moment!

Also get your braking sorted before going to the track!

maybe give this one a miss and be all ready for the next one!

have fun!

Bleed the brakes, get some motul rbf600 fluid. check your pads have a reasonable amount of meat left. If they are a pure street pad you will chew through them pretty quickly. I go through a set of rears every 2 track days as i haven't gotten around to buying good ones yet. The fronts are still fine after 5 days as they are a better pad (project mu HC+).

I also run an extra .5L oil in my rb25. No oil surge issues to date.

Otherwise, just go out and have fun. see what the car is doing, then build from there if you are serious about chasing times.

Go out there, and take a few slow laps to learn the track.

Basically, use the first session to suss the track out, don't try and break the lap record, you'll just end in the kitty litter. So don't go flat out, nice and easy first session.

Come back in, think over what you know of the track now.

Go out. Rip it up.

Each time you come in, think over what you've learnt about the corners.

Cheers for all the replies guys.

I do hear what people are saying about the brakes and oil cooler but here is my reasoning for not doing it yet.

First and foremost i ran out of time as its this saturday. My brake pads still have plenty of meat and i figure seeing as its only practice sessions i don't have to be going flat out the whole time and therefore if i start to get brake fade i can just slow down. the oil cooler is really the same, i said to myself if it was going to be mid 30's or higher i wouldn't go out but its predicting 30 at the moment which i figure isn't too bad and my car should be able to stand up.

i've got a car trailer incase it doesn't and i figure that by not having my oil cooler, better brakes, better tires and camber arms that by the time the next track day comes around i will have all my mods done and will be used to the track/corners and the next one i will be able to go harder and see improvement from the mods done to my car.

This track day for me is basically just a suck it and see.

Cheers!

The track day is this Ssaturday, so I assume it's because he's run out of time.

Ash: What brake pads have you got? You really should go get something decent before going out there, or at least take a spare set, Mallala does go through pads a fair bit. Try get some Lucas pads, they're pretty decent and only cost around the $50 mark.

Take plenty of water to drink for yourself too, it's very draining...

where you get these pads from and have u got a part number?

Cheers Showza!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...