Jump to content
SAU Community

Recommended Posts

was cruising through the boards wen i went into QLD by accident. and i stumbled onto a defect thread that was quite a shock.

HI guys and girls i just thought i had better let you all know about the new law and legislation that was passed about defectable vehicle.

Please dont take this lightly.

i had a fairly stock r32 skyline which some of you had seen before and i was driving along kingston road when i got pulled over by the police. they did a breath test and then asked me to show them my car.

i was defected for

EXHAUST

BOV

POD FILTER x2

FRONT BAR

STEERING WHEEL

and i though ok its my fault i new a few of those were not adr approved and was expecting to get a fine and be on my way...

and here is what all of you need to know

AS of the beginning of DECEMBER the police are no longer allowed to fine anyone for a defect on there vehicle, the new legislation is that any vehicle that is defectable will be issued a notice and given a set time before it is not to be driven again. But the worst part is that there is no fine but know all persons who get defected MUST FACE A COURT APPEARANCE. that is where you will get dealt your punishment.

you will be given 3 choices with you car.

DEREGISTER

TAKE ENTIRE CAR BACK TO FACTORY SETTING

REPAIR ALL DEFECTED ITEM TO BE ADR APPROVED

but the worst part is before you can repair you vehicle you have to make an appoitment with the department of transport so that they will do a list of what is wrong wioth your car.

this is KINGY saying i got done and know i have to go to court i no longert have my car because of this new law.. so please everyone be very careful.

im hoping this only applies to QLD but has anyone heard anything like this for us victorians?

defiantly something i think is up for discussion.

i think the police is taking this to f*kn far, like someone said before, by simply buying a pod filter for $20bux u could face court for it.

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/
Share on other sites

like someone said before, by simply buying a pod filter for $20bux u could face court for it.

This does sound ridiculous but I don't think the value of the modification should be correlated with whether it's defectable or not. You can bash out the contents of your cat converter for free but I would understand being defected for it.

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571020
Share on other sites

Anything is possible mate..

If people stopped being cocks on the road it would make life a lot easier. I drove past Noble Maccas the other day at about 7pm and the cops were already sitting there next to the Pizza shop. Its a dead give away.

It will only get worse because people are not willing to stop being tools on the Street and take it to the track, MEH what can you do.. We drive the cars we accept the consequences.

But i do agree it would be nice if the people who are doing real crimes, braking into houses, etc.

We'll see what happens.

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571040
Share on other sites

yeah, unfortunately you can't stop all the idiots on the roads these days, they think they can get away with anything just cos a cop isn't around. apparently you can dob ppl in by giving there plate to the authorities but i dunno how much this will work.

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571048
Share on other sites

there's not too many stock cars out there that you can have fun with unless you fork out the $$$'s and get some kind of supercar. don't think you have to do to much to GTR's for em to be a fun car though. can't wait to get one!

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571055
Share on other sites

As you said, QLD section... NOTHING to do with Vic.

Getting excited over nothing as usual, it has nothing to do with us.

/end panic

and if they did bring it in, the people who are doings things properly and doing it to meet ADR's and EPA reg's, engineering major mods etc will be fine. My stagea is standard for this reason, my datto on the other hand when its done(if i keep it) will go onto club reg to save hassles.

-Ryan

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571328
Share on other sites

the law will keep tightening and tightening until the people will have had enough and then the law will see real crimes.

not this revenue bullshit.

on that note- victoria had the highest deaths over the xmas period. people are too worried about getting booked for speeding ( 1 or 2 k's over) they probably concentrate more on that than their quality of driving.

victoria- the revenue state..

rant over

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571407
Share on other sites

was cruising through the boards wen i went into QLD by accident. and i stumbled onto a defect thread that was quite a shock.

im hoping this only applies to QLD but has anyone heard anything like this for us victorians?

defiantly something i think is up for discussion.

i think the police is taking this to f*kn far, like someone said before, by simply buying a pod filter for $20bux u could face court for it.

That can't be right..... that's way over the top.

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571590
Share on other sites

yeah, unfortunately you can't stop all the idiots on the roads these days, they think they can get away with anything just cos a cop isn't around. apparently you can dob ppl in by giving there plate to the authorities but i dunno how much this will work.

Really? Has anyone one been dobbed in and done like that yet???

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571596
Share on other sites

it's illegal.

I can't go down the street and partly stab a guy then claim that it's ok as it's kind-of OK because he didn't die.

get over it.

you mod, you live with the fact that you are doing someting against the law.

That has typipcally been my view, as whilst currently restrictive i see the current rules/regulations as havign enough flexibility that when mixed with sensible driving gives you enough room to play with.

Though is what is happening in QLD is actually the case, and other states follow suit?!?!?! I personally think it is going way too far, and for once in my life i would be compelled to go about voicing my concern over such legislation through the proper means.

How many mechanics, workshops gain income and emplyment through the aftermarket industry in this country? Imagine how fewer jobs there would be if all that was happening was oil changes and spark plugs. If the only exhaust beign replaced was a 14 yr old corroded Excel exhaust. How would Australian businesses like Turbosmart, Microtech, Wolf, Autronic, Motec, Harrop, CAPA, APS, Hollinger etc fair? How would major publications by ACP publishing etc survive if all their advertisers went out of business? What of all the parts made by Repco etc that are not genuine spare parts? Are they counted?

What would happen to many young engineers mechanics who from a young age become involved in club/road cars with a long term goal to gaining a suitable education and working in motorsport? They all start out with rebuilding a banged up road car and many go on to work at Van Diemen etc and onto open wheelers in Europe. Maybe its lost on ppl just how many Australians are involved in an engineering level in F1 etc. Or even the competitor whose road car doubles as their weekend hobby that allows them to compete in motorsport?

What about the dealers who put aftermarket wheels and an sports exhaust on a car in the lot in the hope to widening the vehicles appeal? Is the registration on that vehicle cancelled so that they cant sell the vehicle to a unsuspecting customer? (thinking of how many GTI Swifts, Pulsars etc got dressed up by the dealers)

Anyway, what they propose is ridiculous. A much more sensible approach would be to increase the cost of registration of such vehicles and make it compulsory for owners of such vehicles are carbon neutral and establish a more sensible set of guidelines

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3571700
Share on other sites

It's all stupid. If the money they made was spent on safer roads and DRIVER TRAINING as part of a high school curriculum, we'd see less deaths on the road.

Put an idiot in a micra, and he'll still have an accident. True, he might survive, but the passengers probably wouldn't.

Link to comment
https://www.sau.com.au/forums/topic/200761-new-defect-laws/#findComment-3572421
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...