Jump to content
SAU Community

Gym And Supplement Discussion


avrahan

Recommended Posts

Depends on your goals. I know I deliberated for quite some time with what I wanted, didn't stick to a proper diet or anything...so I can't give more precise advice. I can assure that simply increasing intake of good shit will give results, but it might be a little slow for your liking or you might find you aren't 'feeling it' so to speak.

If you decide that you want to smash it out a bit faster or want an easier way to increase calories again without having to cook so much, you might be interested in looking at a good* mass gainer. It will provide the extra fuel you'll need for sure. Otherwise definitely just stick with the BN and push hard. This is where you want to get into the big lifts like deadlifts and squats.

Link to comment
Share on other sites

It's right in the lumbar erectors muscle bellies on each side and the tops of my gluts.

Tis' a good feeling!

If you're feeling it too much in your lumber you're probably not doing it right.

Make sure the back is locked so tight it isn't flexing.

As TTT posted, Mark Ripptoe - starting strength.

Link to comment
Share on other sites

Trying to decide if I should be getting something now to bulk up a little or just stick with it and increase my eating.

I have lost a total of 8kg over the past few months now since starting.

Currently sitting at 69kg 170cm

Are your strength gains increasing? I wouldn't worry if they are.

It's amazing how much body fat you actually have. unless your aim is to 'look' big dont put on false size.

I rate power to weight ratios. Again, it's whatever goal you're after, look good in a shirt, or look good naked.

Link to comment
Share on other sites

Did flat bench DB press with 50s tonight for reps, gym finally got DBs bigger than 42s! Geez!

What's the go with gyms only going upto 40kg odd in dumbells?

Seems like its a rare thing to find a gym that has heavier dumbells.

Anyway, props on getting the 50's done!

Kasko, if u are ordering from BN, let me know so I can get in on it!

Edited by Mitcho_7
Link to comment
Share on other sites

How many reps? How do you get those suckers up into starting position?

What's the go with gyms only going upto 40kg odd in dumbells?

Seems like its a rare thing to find a gym that has heavier dumbells.

Anyway, props on getting the 50's done!

Kasko, if u are ordering from BN, let me know so I can get in on it!

Thanks fellas :)

My little book says I only got four out. Got em up myself but used a mate to guide the weight (to make sure the DBs didn't swing one way or the other). Will shoot for more next time!

The sets went like: 30-8 / 36-8 / 42-8 / 50-4. Felt like I had a bit more but the form was going, so not to be. I know I need to strengthen my shoulders and core to improve my stability. My shoulder presses are pathetic.

Yeah I find it surprising how few gyms seem to have the larger DBs. Would appear to be a staple to me.

I also seem to be the only one at my gym who carries a notebook around and writes everything down. Do any of you guys write down your iron for the day/night? Maybe it's just my OCD!

Edited by God_speed
Link to comment
Share on other sites

Are your strength gains increasing? I wouldn't worry if they are.

It's amazing how much body fat you actually have. unless your aim is to 'look' big dont put on false size.

I rate power to weight ratios. Again, it's whatever goal you're after, look good in a shirt, or look good naked.

This. Let the strength gains put on the kg. People get too caught up in weight figures when trying to get big, which are meaningless without BF% to back them up. It kind of mystifies me when someone says they would like to weigh xxxkg or set weight goals without knowing what they'll look like at that weight.

Also big on power to weight ratios. Putting on fat is only going to reduce this! I love being light at 79kg and benching the same (and sometimes more) than my 100kg friends.

Link to comment
Share on other sites

Thanks fellas :)

My little book says I only got four out. Got em up myself but used a mate to guide the weight (to make sure the DBs didn't swing one way or the other). Will shoot for more next time!

The sets went like: 30-8 / 36-8 / 42-8 / 50-4. Felt like I had a bit more but the form was going, so not to be. I know I need to strengthen my shoulders and core to improve my stability. My shoulder presses are pathetic.

Yeah I find it surprising how few gyms seem to have the larger DBs. Would appear to be a staple to me.

I also seem to be the only one at my gym who carries a notebook around and writes everything down. Do any of you guys write down your iron for the day/night? Maybe it's just my OCD!

Interesting, my gym has 65kg dumbells. Be a long time before I can find a use for them, besides side raising them off the rack to see if I could lift one with one hand lol.

I don't write down my stuff, I'm that OCD that I can remember exactly what I did last session. Not a bad idea though, if you want to track long term progress. It's easy for my memory to blur things that happened last year into "a few months ago"!

I'm 6'3.

Link to comment
Share on other sites

What's the go with gyms only going upto 40kg odd in dumbells?

Seems like its a rare thing to find a gym that has heavier dumbells.

Anyway, props on getting the 50's done!

I might be able to help you with this or at least provide some reasoning.

Dependant on the main target market of the gymnasium really and their budgets associated. They are not cheap and for the amount of people using them in a commercial style setting can be negligiable.

For example, expect to pay about $3 - 4 per kilo for a basic dumbell. Working with a 40kilo set (so 80 kilo at $4) is $320, then theres 42.5's then theres 45s then theres 47.5s and the 50s.

Being a large facility with a membership base over 3000 members we use what i beleive one of the best dumbells out there, the "HammerStrength" range which comes in quite a large set up to the 50 kilo mark. expensive but beautiful dumbells none the less.

The worst thing being is that if you are in a remote facility then you need to also factor in courier costs etc.

Now the other thought of a gym owner can also be the following, if i keep the dumbells maxed out at 40kilo any steroid/beefcakes who like to throw the equipment, well they can go somewhere else as I am targeting the main population, the die hards can go to a die hard gym

You see, as heavy weightlifters, you are not the majority of the population which is really what a succesful owner wants. When showing the average member around do you think the owner wants to show the "avg member" a freeweight area full of massive people yelling, grunting and groaning? no. as it can be quite overwhelming to a new average customer.

So although i beleive 40 - 50 kilo dumbells should be in gyms to assist a minority in a commercial gym, i can understand the thought process if not, unfortunately it does not boad well with weightlifters but that is pretty much it in a nutshell.

Edited by 25GTT
Link to comment
Share on other sites

Just thinking though chest pressing them would show a limited range of motion as you would really only get a straight up motion because they would hit wouldn't they if you try to bring them in?

Anyone use them and if so would for, don't tell me bicep curls :)

Link to comment
Share on other sites

I might be able to help you with this or at least provide some reasoning.

Dependant on the main target market of the gymnasium really and their budgets associated. They are not cheap and for the amount of people using them in a commercial style setting can be negligiable.

For example, expect to pay about $3 - 4 per kilo for a basic dumbell. Working with a 40kilo set (so 80 kilo at $4) is $320, then theres 42.5's then theres 45s then theres 47.5s and the 50s.

Being a large facility with a membership base over 3000 members we use what i beleive one of the best dumbells out there, the "HammerStrength" range which comes in quite a large set up to the 50 kilo mark. expensive but beautiful dumbells none the less.

The worst thing being is that if you are in a remote facility then you need to also factor in courier costs etc.

Now the other thought of a gym owner can also be the following, if i keep the dumbells maxed out at 40kilo any steroid/beefcakes who like to throw the equipment, well they can go somewhere else as I am targeting the main population, the die hards can go to a die hard gym

You see, as heavy weightlifters, you are not the majority of the population which is really what a succesful owner wants. When showing the average member around do you think the owner wants to show the "avg member" a freeweight area full of massive people yelling, grunting and groaning? no. as it can be quite overwhelming to a new average customer.

So although i beleive 40 - 50 kilo dumbells should be in gyms to assist a minority in a commercial gym, i can understand the thought process if not, unfortunately it does not boad well with weightlifters but that is pretty much it in a nutshell.

Loved the explanation mate, I think you nailed it. The gym I've been going to now for the past 1.5 years you would class as very commercial.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • A million years later, searching for something else I posted, I was reminded of this thread. I eventually bought a new gauge. Put it in using the same probe (which has been installed the whole time stopping the exhaust gas from coming out the hole) and.... normal service has been resumed. The old gauge was definitely broken. /semi-pointless closure.
    • They're available from Nissan! I was able to buy a GTR (R33) one.. relatively* recently. Perhaps this stopped now but I bought mine ... relatively recently. I believe the 300ZX one has a different knee-point which is more rear biased, which I think the HFM one echos.
    • Hey Team, A bit to unload here. Hello from New Zealand I have a 2009 Nissan Skyline 370GT ( Type SP ) Auto 7 Speed, that I've had since 2022 and have loved the car since. Its painted in its factory QAB ( White Pearl ) with the Impul front lip and rare boot lid/spoiler with woodgrain interior. Mods since I've bought it and installed: Stillen Gen 3 Long Tube Intakes Motordyne Shockwave Catback Exhaust JDM Skyline Taillights Fake carbon spoiler and front grill ( Will be taking off.... its cringe ) VR30DETT Transmission from the Q50/Q60 to hold up to 550 Foot pounds of Torque ( 753 nm ) reliable  Currently I plan to turbo the car and have all the parts needed ( Photo Included ), I have my tuning day set on August 8th and choosing EcuTek as my tuning platform. Two of my work colleagues has their 370Z ( Manuel ) and 370GT coupe ( Type SP - Manuel ) also turbo'd and they have inspired me to get it done I have prepped quite a wee bit for this, as I had done the VR30 transmission swap over to this car so that I can achieve my HP goals without torque being an issue. I've taken quite a cautions route, as im always thinking about the safety as well as performance with my build, I'd rather do it properly and not cut corners etc etc. Any who, I've recently picked up the AutoStrada cruise control kit with all the included cables/wires/instructions. I've been hella researching around and can't find much on the integration that it has with the ECU and/or system. the only reason why im asking is, because I'm getting EcuTek and one of them RaceRom features allows the ability to switch maps via the cruise control function, which I am currently in the grey area if this would add-on via the Canbus will allow me to switch maps or have the option to use Cruise Control to begin with ( showing up on the instrument cluster to advise Cruise Control being set etc etc )  Because of my model being Type SP, Cruise Control on these models was never an option from factory unfortunately.  Anyone here that is able to shed some light on if the Cruise Control via AutoStrada gives OEM ability over the cruise control. Would love and appreciate any response and/or assistance with this, also happy to answer any question about my build and ill try pitch in where I can. Warm Regards,  
    • I thought the only (new) BM57 that was readily available was the one that was a BM57 but with the wrong bias. HFM or someone's?
×
×
  • Create New...