Jump to content
SAU Community

Recommended Posts

Yeah it's hard to eat enough protein if you're not trying to gain weight, that said, I don't really like the taste of WPC and tend to find it bloats me, so I prefer blends or WPI. I do have to tell a lot of people that I don't think that protein powder has any magical effects etc etc though.

I can definitely agree with you on the idiotic notion that protein powder is absolutely required to build muscle, and is treated like some kind of magic dust hahaha

I don't necessarily think it's too difficult to hit protein targets through normal food intake, though anything above 200g for me personally ain't coming from foods. It's doable for sure, however lately I've been struggling with bloating (and absolutely no f**king idea why....), so I'm resorting to powders a lot more just to avoid feeling like shit.....coz that's counter productive in my books. Bloat = no interest in training (ESPECIALLY squats and deads) = no progress.

Like today I've so far consumed no more than a single regular flat white coffee, and like 125g of lamb w/ 100g each of brown rice and veg. Other than that, I only just finished my shake I started drinking over an hour and a half ago. Admittedly it was 4 scoops of WPC to make up for the lack of real food....but I feel FULL. Like I just ate a f**king baby.

She's not vegan but doesn't like milk

Eats eggs, Greek yoghurt, broccoli, tofu, cheese, bananas, spinach, bread, maxibons etc.

I doubt it's 150gm without shakes, but with them she would be around that

It's around 150g without shakes. I used my fitness pal, when I was first calculating my macros, so I think I have a better idea. I don't use calorie counters anymore as I eat the same foods regularly and know the protein count of them. For example; my morning snack is chobani yoghurt (Greek) which contains 17.4g protein per 170g container. My breakfast averages to 36g of protein (oats, banana, maca powder, flaxseeds, hemp seeds, linseeds) My afternoon snack is 2 eggs with 2 slices of grain bread which is 48g protein for the eggs and 9g for the bread. Lunch and dinner vary but always contain at least 1 cup of broccoli which alone is 50 calories. Add in tofu, beans, spinach, quinoa, brown rice, legumes, chickpeas, lentils..

I eat around 2000 calories a day, it's not hard for me to obtain 150g protein from the foods I consume.

Edited by L33SH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...