Jump to content
SAU Community

Recommended Posts

When I've gone for a 1RM (I'll use my 190kg DL as an example), I've just done my usual warmup set of ~6x 100kg, then 3x 140kg, 3x 160kg (was my working weight at the time, normal rep range of 5-8), then the 1RM attemp (which I got 2 reps of :P).

This wouldn't be a normal routine by any means, and I'm sure there's better ways to do it. It's just what I went with - warmup, then step up incrementally doing only a few reps at each weight, then 1RM :)

  • Like 1

10 reps of warmup weight, 5 reps light weight, 3 reps medium weight then do 1rm

Thanks L33SH ill give that a go.

In your powerlifting point of view if i can get 8 reps out at 120kg for 6 sets i should be reasonably ok with 155 for a single? Or should i aim a bit lower?

120kg x 8 puts you approximately 150kg for a single.

Skip the empty bar, it's not a warm up when you're capable of lifting that much. Something like 70-80kg for 10 reps would be fine for you to sort out good form / range of motion and warm the muscles a little without risk of injury. Then I would do 100 for 5. Then 120 for 2-3. Then take a shot at the big 155. Or 150, as the 1RM calculators think you're capable of.

  • Like 1

Up to you but I like banking weight away, then you've got a baseline you can go up from. Always good knowing you've got more in the tank for next time than thinking you're stronger than you are and getting disappointed.

I also feel you're less likely to injure with something you can at least get half way up and then have spotter save you than something you can't get off your chest but give it everything / strain. That could be bullshit though.

Good luck, that'll be a solid attempt regardless!

  • Like 1

Yeah i will play it safe. I believe mindset has a lot to do with strength too. A failed lift always sets me back a bit, even when needing a spotter. Even though me and my mates train a bodybuilding style of training we are all VERY competitive and everyone cops constant ribbing hahah.

And will have a spotter cant risk injury anymore than i do

Bench is sitting pretty at 126kg

This after a set of 9 x 100kg

Might be able to do 128kg fresh

Inching closer to the 130kg goal

127.5kg after a set of 10 x 100kg. So close to 130!

I prolly should start a build thread, but this thread is inactive enough for me to post in...

Tonight showed me once again how important food is. Last bench session I struggled to put up 120kg for a single...after a weekend of sparse eating. I've pigged out all day today and yesterday and bam...new pb.

I'm prolly more happy about the 10 of 100 as I've never hit 10 before!

  • Like 2

Ok had no spotter so did 10x 90kg then did 140 easy could have pushed for 2 or 3 but decided to set the squat rack up and try 150 and failed. Going to try fresh with a spotter in a few days.

I failed 3/4 of the way back up so got a feeling i talked my self into failure. Back on the horse and try later in the week

lol gotta love that mental battle where your head is actually telling you you can't lift this and that it's too heavy / give up now you weak piece of shit.

So many bench 1RMs where I know if I wasn't in it 100% mentally I would have given up on it. Have taken 10 seconds to get away from a sticking point before.

Also trigger, try and follow that warm up routine Leesh and I suggested - 90kg for 10 may be sapping a little bit of strength from you and may also be too much of a jump to 140 - don't follow what I do with my set of 10 x 100 cause I'm not trying for true 1RMs there. If I didn't do those I could prolly add 5kg to the single I attempt afterwards.

Hope you get 150 next time!

  • Like 1

Curious to get peoples opinions/views on straps when deadlifting...

So I have only just begun using straps.......I only revert to straps once my grip fails and I'm unable to complete a set.....til then both my hands are in the overhand grip position......

Now until resorting to straps in the last few months I had always used the 'mix grip' even at lower weights.....

This was until I saw how much my rib cage etc. seemed to twist once I watched myself on video hence now going to straps.....

Just curious to know what you guys do......

Curious to get peoples opinions/views on straps when deadlifting...

So I have only just begun using straps.......I only revert to straps once my grip fails and I'm unable to complete a set.....til then both my hands are in the overhand grip position......

Now until resorting to straps in the last few months I had always used the 'mix grip' even at lower weights.....

This was until I saw how much my rib cage etc. seemed to twist once I watched myself on video hence now going to straps.....

Just curious to know what you guys do......

You can use double over hand grip but you have to tuck your thumbs in so they lock. It hurts but it works. Not good for high volume.

Really best suggestion is persist with out straps and work on your grip strength.

I had same issues and have been working on it since. Alternate grip makes me twist when i lift which in turn puts my pelvis out.

My forearms have gotten a lot bigger since ditching the straps

I am persisting as long as I can without straps and my grip has definitely improved significantly but still once I'm getting up around 160kg+ for reps the grip fails way before my strength does.

I am doing things to work on grip such as holding the weight at the top at the end of a set etc...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...