Jump to content
SAU Community

Half Cage Install

sidewayssam

By sidewayssam,
in Fabrication

 Share

Recommended Posts

Craved Grand Master

Craved

Posted
Posted
bolt in i think, going to look at it tomorow, wanting it to be legal

you will definately need to call your local RTA office and discuss the requirements for a bolt in cage, it may not be legal at all, even with it a bolt in.

you will need to get it engineered as well, so maybe call a local engineer to find out what they need to pass to give you a blue slip for it.

YCOPY Enthusiast

YCOPY

Posted
Posted
im going to be buying a half cage for my r32, ive looked in the diy/faq thread but cant find anything on installing them, has anyone got any pictures or have any information on how to install them

Hey,

I have just finished putting a half cage in my 33..it may help..mine is road legal with a engineers certificate.

Scotty

YcopY

post-10743-1200371107_thumb.jpg

post-10743-1200371125_thumb.jpg

post-10743-1200371145_thumb.jpg

post-10743-1200371163_thumb.jpg

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Hey,

I have just finished putting a half cage in my 33..it may help..mine is road legal with a engineers certificate.

Scotty

YcopY

That cage is bolted to the inner wheel arch!! and can also come into contact with the head in a crash!!! Your engineer is a very brave man (or stupid)

Richo Mentor

Richo

Posted
Posted
That cage is bolted to the inner wheel arch!! and can also come into contact with the head in a crash!!! Your engineer is a very brave man (or stupid)

Arent all bolt in cages like that though (to the inner wheel arch)?

Im with you about the head clearance, that looks pretty tight there!

Cheers

Ric

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
mines bolted to the inner wheel arch. Is this no good???

chassis rail my friend...a lot less flex. An inner wheel arch is a single layer of thin sheet metal. Ive also see 1st hand how easily an inner wheel arch folds up in a crash.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Arent all bolt in cages like that though (to the inner wheel arch)?

Im with you about the head clearance, that looks pretty tight there!

Cheers

Ric

if your head can come into contact with the cage (or padding) its illegal...end of story...engineered or not.

YCOPY Enthusiast

YCOPY

Posted
Posted
so thats all bolt in?

is it now a 2 seater?

which state are you in? do you have any details on what was required eg . distance from head to bars, mounting point specs etc that you can share?

Yep its now a legal 2 seater, Im in NSW, i have to Code of practice for car modifications some where here on my PC, Pm me your email address and i will send it over to you.

Dirtgarage

yes its botled to the inner arch, as the cage was made up by the boys at bond roll bars this is where i was told it was to bolt to, it does have a dirty big bit of steel as a plate under it as thats what the COP for car modification states. But i do understand your point about using the chasiss rail. They are removable rears so i can change that.

I do agree the head clearance is a little tight in that pic but with the seat in its forward position (which is my driving position) it meets the clearance requirements just....

Cheers,

Scotty

Duncan Grand Master

Duncan

Posted
Posted

is it a cams approved cage or not? bond know what they are doing, but if its not approved you can get knocked back by scruitineers at any cams event. And I don't see the point of a cage if you are not going to hit a track?

Duncan Grand Master

Duncan

Posted
Posted

check the online cams manual. It was updated 1.1.08 to specifically say non-approved cages can only be used if the scruitineer for the event is OK with it, ie if you strike a dickhead they can ban you. they have been discussing this clarification in rules for years so watch out.

bond can provide the compliance details as long as they built it to the rules

YCOPY Enthusiast

YCOPY

Posted
Posted (edited)
is it a cams approved cage or not? bond know what they are doing, but if its not approved you can get knocked back by scruitineers at any cams event. And I don't see the point of a cage if you are not going to hit a track?

Duncan,

When i ordered the cage i told bond that the car was being setup to drift (competitevly) and this is what i was given. the cage is functional not for show...that would be just wankkie...

Im downloading the cams manual now so i will have a read through it.

Well..After having a read of section 6 - schedule j and re talking to bond it appears to be ok with cams..but im not 100% sure. is there somewhere i can take it to get checked?

Sorry to hijack this thread..

Edited by chippagti

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • MBS206
      Chris' Toyota Mark ii JZX110

      By MBS206 · Posted

      I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • GTSBoy
      Chris' Toyota Mark ii JZX110

      By GTSBoy · Posted

      I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...