Jump to content
SAU Community

Recommended Posts

My votes go to www.prestigemotorsport.com.au and www.j-spec.com.au

Both have been around for years, the 32 was imported with prestige and i haven't had any major problems with her since (near 3 yrs so far)!

I'm also looking at importing an R34 atm. Is autoworx cheaper when they import specifically for you compared to the available stock on their website?

Edited by SR32

but autoworx gives money back gaurentee if the cars not as described

if you do a search theres been quiet a few horror stories about cars that had accident damage and cant get compliance

then you left with a very expensive track car?

we are importing a 34gtr for a customer now and if your ok with reasonable km you can get a 99/00 with 80-90000km for as low as 45k landed and complied . you may even get a vspec for not much more

80000km may frighten some people but remember these cars are now almost 10 years old so thats reasonably average km and a great price to get into a 34 gtr and we are seeing beautiful grade 4 cars come up at that price even with those km so we are still talking excellent quality

all our cars are of coarse hand picked and inspected in japan and our guys know skylines inside and out

for the record we have never had a car we supplied that couldn't be complied or even come close , were just not in that game

and you will save significantly from importing over stock cars as the stock ones come with warranty and are lot prepared etc

Edited by 32vspecII

It's always nice to drive a car before you buy it, but as long as the kays are genuine, the grade/accident history is accurate, and the import company can pretty much guarantee the safety of the car- then i guess you'd be okay.

I've been told, regardless of the importer, if you can get one of the stocker cars from here, you'll do well:

http://www.global-auto.ne.jp/stock/public_...php?model=BNR34

You will see a few of their cars referred to from the other importer's sites.

  • 3 months later...

i see somebody's finally looking to get that GTR ey?? anyway i bought mine blind from the east..was a little scary when i think back about it..paid full amount upfront without even seeing or driving the car..but thankfully everything turned out fine :( ..anyway i think it would be best to pay the premium and go thru a proper company to have your car imported..saves you the worries and headaches if anything turns out wrong

autoworx FTW :(, they import good cars, have great service and look after you

i can honostly say they are the only workshop i have used that havnt stuffed me round yet, and i have used most known workshop around,

my car came from there and many parts also came from them all with great service :P

YEP... when i think back on it, wish i bought my 34 from Autoworx... Really good people down there, will definatly be gettin my parts through them from now on... URAS KIT FTW... when i can afford it that is!!

i see somebody's finally looking to get that GTR ey?? anyway i bought mine blind from the east..was a little scary when i think back about it..paid full amount upfront without even seeing or driving the car..but thankfully everything turned out fine :D ..anyway i think it would be best to pay the premium and go thru a proper company to have your car imported..saves you the worries and headaches if anything turns out wrong

yeah i don't know if i wanan buy blind hey it's a bit risky

i mean another option is

Kelvin jsut swap cars with me :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...