Jump to content
SAU Community

Recommended Posts

I'm over jap cars! When you go prestige you will never go back.

Try it one day you will know what I mean - Then realise you use to be a hoon - Then realise why everyone hates them and join them hating them. :-)

Jap cars were good 5 years ago when everyone left you alone but now everyone is against them.

Go prestige - No defects - No EPA's - Save on Petrol. And all you need to do is put a set of sexy wheels on.

Wholeheartley agreed.

I don't own any prestige car at the moment but I am hoping to buy a 2006+ Bmw series 3 by end of this year fingers crossed. For the amount I'm going to spend, i could perhaps own a evo x as i believe jap cars do have the sheer grunt and power, no one can dispute that but end of the day, they severely lack in class and looks.

I am beginning to notice more Audi, Merc and Bmw's in Melbourne's inner cbd and it's surrounding vicinity.. This city is slowly but surely transforming into a high class city, after all, it is Australias fashion capital.

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

I think the Bmw's new 3 series look great with its smooth curves.

bmw-3er-silver-exterior.jpg

Edited by Barbarian
  • Replies 213
  • Created
  • Last Reply

Top Posters In This Topic

Driving a jap car around the more affluent suburbs full of German cars is great because there aren't anywhere near the amount of police around to hassle you as there are compared to suburbs where most the streets are scorched with burnt rubber.

That is except for anywhere around Chapel Street and Dandenong road

I am beginning to notice more Audi, Merc and Bmw's in Melbourne's inner cbd and it's surrounding vicinity.. This city is slowly but surely transforming into a high class city, after all, it is Australias fashion capital.

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

What model are you going to be going for in the 3 series?

Correct me if i'm wrong but top spec (before m3) is the 335i (twin turbo 6cylinder). These do come in sedan form aswell correct?

Whatever you buy just make sure it's black :P

Yes I will give you the fact that Euro cars are prestige etc.However thats about it.I been behind the wheel of a few of them and honestly they are just ordinary cars that are ridiculously overpriced.Sure they may be a little quieter than most cars.And as far as build quality.they went down the toilet years ago.Ask anybody who ever works on one-They are just as big a shitheap as any falcadore.As far as I am told most of the mercs get their parts from Korea.I used to work in an unnamed company that had 50 Merc Sprinter vans...Every one of them blew gearboxes before hitting 100000 km..! ( $15000+ for the tiptronic auto )Then the diesel fuel injection systems started shitting themselves as well as computer glitches that wont allow it to go out of nuetral, doors that dont shut properly. I think VW is the best quality car in Germany right now...At least they are reliable

Im not over Japanese cars, but I am on a "break" from them, after nothing but turbo cars for the past 13 years its kinda nice to be driving a N/A v8 for a change. My Xr6t changed my mind on the whole japcar scene, I really dont go 'driving' much at all these days, most of what i seem to do is boring stuff to & from work etc....

Must be getting old! :P

Who else is feeling the same symptoms?

They just don't seem to have that "classy" or "elegant" touch in them, no matter what car or what brand, it's still a Jap car end of the day.

When driving around in Melbourne's higher class suburbia, you feel like a foreigner in your Jap vehicle.

sounds like you're trying to ' keep up with the jones's.' does it really matter what other people think about what car you drive.

if you drive an modified import you're pigeon holed as a hoon, if you drive a prestige car you pigeon holed as a snob.

personally i think prestige cars are rediculously overpriced and a complete wank, where you often pay >60K for something with a 2.5 litre engine, a hole bunch of electronic gadgets that break soon after the warranty runs out, and a brand name that's supposed to say 'look at me i'm successful'

maybe i just feel that way cause i work in 'upper class' mosman (sydney), and serve alot of customers owning poodles, driving bmw's/mercedes with superiority complexes

not trying to be rude, maybe i'm reading it wrong, i don't know, and that you meant you're in the market for a car that has a nicer interior and that looks more civilised than an evo etc??

lol as if a run of the mill predominantly junior marketing intern owned 3 series beemer is a sign of luxury. that's like assuming sipping cheap champagne in copious amounts at melbourne cup day can turn you from a skank to a lady.

down the track i'd be definitly considering a higher class euro car with some balls and hopefully be in the position to keep the liner as the fun weekender. i just want to drive a pimped out audi merc beamer or bentleigh's like all those rappper's do before lights out.

Ummm the Quality?

Its just like saying what can you get in a Skyline that you can't get in a Holden in the same price range?

your comparing lemon's with mango's

wat quality?

2 of my mates bought a 318i and a holden statesmen of the same year from the same dealer. the bimmer's broken down 3 - 4 times already and cost about 3 grand to fix. the stato's runnin like brand new. not saying holdens are better or that i'd ever choose a holden over a euro but yeah...

quality my arse, you think all mercs are bulletproof just coz they're mercs? they're made in mexico ffs

just my opinon but if i was to ever go euro i'd get somethin from the $100K+ range and from italy but since i dont have that sorta money ima stick to what i can afford lol

My friends live in areas where every 2nd car parked in the drive way is a German built car and when i go out for coffees or dinners in these areas, i do feel like a major hoon in my Skyline even though my car is fairly moderately modified.

bmw-3er-silver-exterior.jpg

I live next to the city. I drive an r34. The cars in my apartment carpark are, Porsche GT3, Porsche 911, bmw M6, bmw 3 series, 5 series, 7 series X5s, mercs e class, s class, you'll prob end up a millionaire if there's a grand theft auto :blink:. Anyway, I don't feel anything at all. We drive pass each other looking at each other's cars with a smile in our face.

I'm still young, not even mid 20s yet, i feel that driving an import at our age is perfectly fine. However, when i reach my late 20s, i'll be planning to get a euro car BUT still keeping an import as a toy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...