Jump to content
SAU Community

Recommended Posts

hey everyone, i recently got a new job and i have to drive pass around 3-4 speed camera twice a day.

so this is making me a bit edgey so i just want someone to help me clarify:

1, how much km do u have to go over the actual speed limit until you get snap

2, how long will it take for them to send a fine letter IF i did get caught

-pete

Link to comment
https://www.sau.com.au/forums/topic/201850-questions-about-fixed-speed-cameras/
Share on other sites

1. usually over 10% of the speed limit, ie over 88 in 80 zone

2. not really sure on this but i think someone mentioned 6-8 weeks or something..

I've heard of many cases where they've been set to less than 10%.

DO NOT speed past them.......

From big-ass trips... speedos are usually set to be lower than the speed you're doing.... If you use a nav. unit, it always displays that you're travelling slower than what the speed ostates (they might not take into consideration contours however)... But the speedo-checks on highway to melbourne registered same speed as GPS; which was at least 7km/h under what the speedo read. - so don't get paranoid, but don't exceed the limit. Driving instructors recommend 3km under speed limit to do driving tests :blink:

I thought fines always come within 2 weeks?

Keep in mind that if is IS 10%, it's still not going to be a good measure, due to inaccuracies in your speedo, the camera etc. Just do the speed limit through the camera.

thats when a pfc commander comes in handy :blink:

If you know where they are why would you speed past them?

:blink:

like a few people have said, speedos in cars generally read about 5km/h over what you are doing. so if the speedo says 100 youre doing 95. so if you go through a speed camera on, or even slightly above the limit, you should be right.

cops with radar/lidar ive heard need to give a 10% leeway. add into account that your speedo is high as well..

many times ive been in a 100 zone, with the speedo reading 110 to 115, and a cop has been there, and i havnt been done.

10% are you kidding me? lol. It's more like 2 or 3km/h. so 63 in a 60 zone will most likely see you booked, as will 103 in a 100 zone. I have no idea who came up with this 10% theory, but it's bullshit.

10% are you kidding me? lol. It's more like 2 or 3km/h. so 63 in a 60 zone will most likely see you booked, as will 103 in a 100 zone. I have no idea who came up with this 10% theory, but it's bullshit.

your theory is no better

it's definiately not 2-3km/h

Too lazy to edit but:

http://www.skylinesaustralia.com/forums/in...t&p=3560020

afraid to say.. not a good year for me :)

Just curious to know, do policemen have a Flash on their Radars?? or any other speed recording device (Laser)? etc

I was doing abt 111kmh in a 100 zone :D:( silly me,

I think i saw a flash from behind some trees and an un marked commodore parked some 2km down on the M4

can't be sure if it was me, as there were a few other cars around me doing the same speed...

but then again, i can't even be sure if it was a police flash or some blue light i saw through the trees in a factory or sumthing else :D ..........

dam , sooooo anxious. hope i dont get anything in the mail.

Most radar's do not have a flash, if the radar operator sees someone doing high speeds they would radio the chasing car (in this case I assume it would be the unmarked commonwh0re parked 2km down the road) telling them that x person is speeding and to chase em down.

However there are new radar setups where the radar is on the ground and the camera is behind it. They need to have a good lock on ~3secs then takes a photo immediately. Quite easy to notice this.

I think all police officers are being currently trained to operate radars, all HWP's know how to use radar's already.

As for your case, ADR's specifies 10% tolerence for speeds, so maybe you are being paranoid.

from

http://rvcs-prodweb.dot.gov.au/files/ADR%201803.pdf

5.3. The speed indicated shall not be less than the true speed of the vehicle. At the test

speeds specified in paragraph 5.2.5. above, there shall be the following relationship

between the speed displayed (V1 ) and the true speed (V2).

0 ≤ (V1 - V2) ≤ 0.1 V2 + 4 km/h

The equation means as follows:

95 Being Indicated speed 90 being true speed.

0 <= 95 -90 <= 90*0.1 +4

0 <= 5 <= 13

So there for Indicating 95 but going 90 is in the acceptable range. Were are as

110 Being Indicated speed 90 being true speed.

0 <= 110-90 <=90*0.1+4

0 <= 20 <= 13 Which means its not acceptable.

So the allowable difference depends on the speed the car is actually traveling.

Put easier, your indicator must NOT be showing a slower speed then the car is travelling, and it must not indicate more the 10%+4km of the true speed

So In a 60 zone, your indicated speed must be between 60-70 to be ADR approved.

In a 80 zone, 80-92

In a 100 zone, 100-114

In a 110 zone, 110-125

10% are you kidding me? lol. It's more like 2 or 3km/h. so 63 in a 60 zone will most likely see you booked, as will 103 in a 100 zone. I have no idea who came up with this 10% theory, but it's bullshit.

You are wrong as far as NSW goes ( as we speak, plans are in place for much less leway) but you are correct as far as VIC goes, 63 in a 60 zone ,84 in a 80 zone and they get you. This is speed cameras only, its up to the cop if its a none camera speed trap. What gets me in the case of VIC is the fact that the equipment they use to measure speed has a plus or minus 3% accuracy according to manufactures guidelines, if I was booked for doing 63 in a 60 zone I would defend it in court and I would win everytime!!

yeah true. I still don't believe it's anything like 10% though. Someone please drive through a 110 camera at 122 and tell me what happens :P my guess is fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...