Jump to content
SAU Community

Recommended Posts

Hello all,

i was just wondering about what would be involved with removing a turbo from a gtst. I got my p plates a few weeks ago and have been a keen skyline fan for many years now and am look to buy a R32 or R33 as my first car. But due to the new p plate law in queensland i am unable to drive a car with a turbo so i have been looking for a gts. But as i have found out that a gts in my price range is a bit hard to come by ( as i am a 1st year apprentice ) so i was thinking of just buying a gtst in my price range and removing the turbo if it is all possible to do with costing lots of money. Any help will be greatly welcome.

Cheers Chris

Link to comment
https://www.sau.com.au/forums/topic/202342-removing-a-turbo-from-a-gtst/
Share on other sites

Congrats on getting your Ps...now...i firmly beleive that a rwd turbo like a skyline or silvia is not a good first car for a novice driver...and i think that many will back me up on this...i'd recommend trying something alittle more forgiving before you tread this path...

Now as for de-turboing a skyline...if that is what you are talking about...there is no way of doing it...not without changing a fair load of stuff...and after that...it will still run like crap and be slower than a NA equivalent due to lower compression...so...don't take it the wrong way but its a stupid idea...you are better off buying a NA skyline first and then swapping the motors at a much later date after you get more driving experience and can afford it...

If i read your post right you are saying that in qld it is cheaper to get a gtst than a gts??

Im also guessing that the power to weight ratio laws are the same as in in vic and im pretty sure that in vic you can drive an R32 gtst on your p's.

in my opinion, i honestly wouldnt think its worth all the hassle deturboing a car. Because it is for a first car as well, you shouldnt spend too much on it. If there were any more problems afterwards then it will definetely cost more to fix.

I reckon getting a skyline for a first is a good choice as long as ur SENSIBLE about driving it. its also good experience coz the way i see the restrictions are a good thing of keeping ppl safe but as soon as ppl jump into a high powered car straight after they get their fulls, then they wouldnt know how to handle it which can also be just as bad.

The point of buying Nissan is for a turbo IMO.

If you're going NA (that's the only realistic option) there's better NA's than Nissan for several reasons (such as any Honda will be lighter than an R33 = economical, good for apprentice wages) and why bother with something that isn't great to begin with :ph34r: .

I'd go a Civic/Integra or Celica with light mods (exhaust/intake/ECU/increase compression a little) until full licence. Still fun but realistic. Keep for a year or two and learn how to take corners (if you're a virgin :) ).

I got my R33 at 22 years old, full licence, and appreciate it heaps more cause I was driving a dog box corolla for all these years.

Edited by R338OY
The point of buying Nissan is for a turbo IMO.

If you're going NA (that's the only realistic option) there's better NA's than Nissan for several reasons (such as any Honda will be lighter than an R33 = economical, good for apprentice wages) and why bother with something that isn't great to begin with :ph34r: .

I'd go a Civic/Integra or Celica with light mods (exhaust/intake/ECU/increase compression a little) until full licence. Still fun but realistic. Keep for a year or two and learn how to take corners (if you're a virgin :) ).

I got my R33 at 22 years old, full licence, and appreciate it heaps more cause I was driving a dog box corolla for all these years.

the new laws state you can't do any performance mods on your p's, well that's in nsw, don't know about qld

There are a number of threads similar to this, but i swear there was a post if you remove the turbo, it is still registered and classed as a turbo vehicle?? may be wrong but swear i read it on one similar post.

Hope that helps

hey i have a N/A skyline and i would recomend it better than deturboing a car. keeps the compression and would there be problems with computer not recognising a turbo there just wondering

whats your budget cause there are some nice n/a's out there mine goes fine good power and can easily drop turbo in later

just get a gts4

R32 GTS4's are turbos, R33's are non turbo as they have an rb25 engine and that with 4WD would be too close to a GTR. Well thats the reasoning i heard way back when i got mine. I agree with r33boy if you want something you can enjoy with a bit of grunt then stick to a smaller car. a big NA skyline really doesnt put a smile on your face when the foot goes down.

Well i am not sure if the laws are the same between NSW and QLD all i know is that i cannot drive a car with a turbo, heavily modded engine or a v8. I am looking to spend around $10 to $15 K all depends how much i have saved up by the end of the year and how much i will be able to borrow. As for a gtst costing more then a gts in QLD there are not alot of gts for sale that i can find right now but i have not been looking really hard just looking for now. There are a few gts that i have found but they are either auto or cost more then $15 K. And i mean no offence to all your guy who have a skyline thats auto but really having an ayuto skyline just would not be the same. Also about the being sensible i am a pannelbeater and have seen some pretty messed up cars from people doing stupid things and i am not like that. Speeding, drifting and burnouts should be done either at the drags or on a race track.

Thanks all for your posts they have helped me with this.

Chris

Why not look around for a dinged up late model honda, should be able to make money, and enjoy the driving experience?PS a VTi-R is about as quick as a GTS-t, so you can have your cake and eat it too.

Edited by Adriano

i would be unsure of how u could BUY a turbo if u cant one have one?!?!

and even if u deturbo it and replace piping and electronic, what are u going to do about the VIN? and the other ID plates?

  • 3 months later...

i have a 33 4door gtst and last month my turbo carked it, since then i have bought a new one but have not got around to installing it yet.

point being:

i have a fmic and simply removed the piping going over the top of the engine block blocked off the end coming from the cooler and blocked where the pod and airflow metre was and put my pod and afm straight onto the throttle body. works fine. admittably not quite as powerful as NA and a hell of a lot louder. but no running issues at all.

in saying this i live in qld and previous posts are correct if the car is manurfactured as turbo, v8 or is modified fo rperformance in any way, p platers cannot register in their name or drive these cars as at 29/06/07.

neway good luck choosing you first ride mate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...