Jump to content
SAU Community

Recommended Posts

Just wondering what oil pressure a R32 GTR will run at idle and revs when hot and cold. Also what eng oil temp do they usually run. I thinnk my oil pressure is a little low and the oil temp seems to be alot higher than it usually has been. oil temp is up around the 75 to 80 deg even on cool nights. It has a big oil cooler on it. The oil pressure is below 4 kg/cm3 at idle when cold and is back to near nothing when hot. I havn't checked it with a mechanical gauge yet but will be maybe this week end.

Link to comment
https://www.sau.com.au/forums/topic/202552-r32-gtr-oil-pressure/
Share on other sites

I just started a brand new engine (with forged internals etc), and at idle when cold the oil pressure is about 6.5kg/cm3, and drops to just under 4 when hot. Ive only idled it around the local street because its untuned though. The oil temp doesnt go above 80 degrees when hot, with a large oil cooler. Both gauges are greddy expensive ones.

Shaun.

  • 2 weeks later...
  • 2 months later...

dont listen to the ppl tellin u to change ur oil. its not ur oil. its the sender unit.

mine also did the same.. i shit myself real bad when i first noticed it.. it was @ 0 @ idle.. but after a few days i noticed that even when its on 0.. the light doesnt come on.. u know why??

because they run 2 seperate systems. 1 fails.. the other doesnt. put an aftermarket gauge on it and ull see the difference :cool:

  • 6 years later...

Hey All, I think I need some similar advice to this post.

I just bought a GTR in QLD that I have driven back to Melbourne over the last few days. I never really paid any attention to the oil pressure to begin with, but noticed today it was on zero - but the car seemed to be performing fine - great even! it did over heat on me yesterday somewhere in central NSW but it seemed fine again after a rest. I have noticed it seems to be running hot, & im not sure why.

When boarding the boat we were in the waiting line with a lot of idle, stop start etc with the engine getting rather warm. The oil pressure light then came on, with it barely idling, coughing & spluttering. I turned it off for a few minutes, then it was fine again & didn't miss a beat getting onto the boat.

I write this now sitting in the bar with a beer, freaking out! im hoping the oil pressure issue is related to the over heating, & that is hopefully something simple like the thermostat?

The motor has been rebuilt & I have all the receipts for it, I am living in hope its not the motor...

what should I be checking?

Im thinking if oil pressure light came on while it was spluttering might be that it almost stalled itself and as such dropped oil pressure enough to set off the light, but probably kicked itself back to life.

Have you checked the dipstick? Overheating could be a lot of things and it will need to be narrowed down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've got a 2011 J50 that I imported six years ago. The unmodified factory AV system date and time has always been correct ( Japanese timezone of course ) up until last month. About two weeks ago, at engine start, the system wished me a happy new year ( in Japanese of course ). I can't think of anything that would make the system think that the date had changed, unless the GPS component has failed/reset somehow ? I checked the GPS reception in the system settings, and it can still see the satellites. Has any other J50 owner had this happen ?  It's no biggie, just annoying that it tells me the wrong date anytime I start the engine. 😅
    • Love following your adventures on IG, hopefully if you're still around in Japan when we visit again wouldn't mind going for a few beers with you (that's if you're keen on hearing how I hate Nissans).
    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
×
×
  • Create New...