Jump to content
SAU Community

Recommended Posts

Look, we don't want to troll or dash any hopes out there, but let's face it, there are a ton of unanswered questions about the R35 out there that we just don't know yet. STILL, it doesn't hurt to guess any of these answers, right? We (me, Marc, or Jon) hardly read this section of the forum, because it's all so speculative, but this is our opinion here that it's just not worth even thinking about the R35 at least for another year or so, for the following reasons.

Here are two (what we believe to be) facts people should keep in mind when thinking about doing compliance for this car (remember, we have 19 models on our compliance list now, largest in Victoria, we know what we're talking about at least a bit):

#1. The new Nissan R35 GTR has now been released in Japan. Unfortunately it will be 18 months (from October 24 2007) before it is eligible for import under the RAWS scheme unless Nissan provide a letter that they will not be importing it to Australia (unlikely I think). The word is that Nissan are trying for Full Volume approval for some time late 2008. (This 'word' comes from an engineer we know)

Bringing in a Vehicle for market evaluation is a big risk at this stage as it may never get to the stage of being eligible for compliance. (I.E. there has to be a period of 18 months where Nissan doesn't bring it in themselves, or else it will never be eligible)

#2. On top of that the new sevs emissions laws are making it so tight that no new raws vehicles to date have passed an emission test. This could be how the government is trying to squeeze out importers.

That's about it, really....we'd love to be wrong about this stuff, so please start the flame war now. I realize that everyone's quite excited about this car....but if you're bringing in test cars, I'd recommend having a backup plan or at least thinking about the issues I've outlined above.

cheers!

david @ carizma

Link to comment
https://www.sau.com.au/forums/topic/202581-unanswered-questions-about-the-r35/
Share on other sites

i dont' know much about this emission thing, but if you stick 20 cat on the car all the way through the exhaust, that would lower the emission wouldn't it? Why don't they just do that to test the emission and then swap it over once its all done?

sorry, you lost me on that post.

Why do you think this car isn't for dealers? We've had dealers asking about bringing in evaluation vehicles already, and we told them pretty much what I outlined in the above post.

I understand what you're saying about 'waiting for others', and that definitely seems like the smart way to do things now, but I don't know how you can say it 'will not be hard', because it might be IMPOSSIBLE, which is more than hard.

As I said above, Nissan has 18 months from release in Japan to bring it in themselves. Until that 18 months passes OR Nissan writes a letter to DOTARS giving up their import rights, no one can bring them in under SEVS.

Our dealership wouldn't bring in a car in this range, simply because we could buy about 10 R34's for this price and turn them over much quicker. It becomes a simple calculation of your rate of return to see if it's worthwhile. For us to add a new vehicle to our schedule, we'd have to do about 20 vehicles per year to make it worthwhile for compliance, granted with a car like the R35 it'd drop, but still, we're already maxing out our plates so why bother?

The bigger issues that are brewing have not even been covered yet as to if approval will be granted under new vehicles so for the first workshop that tries let see what happens as a few people thought it would be simple and jumped in with out looking into everything.

The R35 GTR will not be hard to get approved if you know what you are doing from a signatory point of view the issues are big picture stuff associated with Nissan, DOTARS, Evidence and time frame.

This isn't for car dealers who want to make a quick buck territory it is for people who do one thing and one thing only.

Hi David, thanks for your post maybe you can help us clear up what is going on in the industry surrounding the R35 GTR.

First off - not disagreeing with you but can you please point me to the relevant legislation which says there is an 18 month gap between the release of the vehicle and the eligibility for import into Australia. I'm not saying it isn't there or arguing with you I just want to know more of the background and haven't found that yet. (I'm currently re-reading Circular 0-2-12-1)

That being said, the R35 GTR is already on the eligible vehicles list for new vehicles only; are you referring to used vehicles only? Or both? As you are in the trade, can you explain what this listing in the SEVS list means with regards to importing a brand new car?

Lastly, since we know RAWS already have cars in the country what are the steps they would be going through right now with these cars to gather evidence? I assume collecting emissions data and safety data, anything else?

Again thanks for posting - just trying to learn more about the industry in general.

off the top of my head, you'll need to supply structural integrity test results (side intrusion, frontal impact etc), as well as provide evidence that it complies to the new emissions regulations (keeping in mind japan's still a bit behind on this area, hence their cars being delivered with higher power outputs than overseas).

gathering collision data for an R35 will be fun. not many written off cars you can use a good side of to collect data, and I'd assume Nissan's not too keen on supplying the data either.

yes it's correct. to import used cars via SEVS in low volume they have to have been offered OS for 18months before nissan started selling them here in full volume (this is what happed with S15s, 18months on sale OS before nissan started full volume sales). at the moment new cars are eligible under SEVS but no-one has got compliance yet, but it should be possible. used cars is wait and see what happens. no-one can accurately predict that at this point.

off the top of my head, you'll need to supply structural integrity test results (side intrusion, frontal impact etc), as well as provide evidence that it complies to the new emissions regulations (keeping in mind japan's still a bit behind on this area, hence their cars being delivered with higher power outputs than overseas).

gathering collision data for an R35 will be fun. not many written off cars you can use a good side of to collect data, and I'd assume Nissan's not too keen on supplying the data either.

The car has been built with emissions in mind and meets the Japanese U-LEV (Ultra Low Emissions Vehicle) standard meaning it has emissions 75% lower than those required by the current emissions criteria in Japan. There is also some sources saying it meets Californian ULEV standards as well but I don't blindly trust those sources.

Wasn't sure how to cut and paste multiple posts, so I'll try to simplify what might be some misunderstandings below.

Basically, it makes sense to look at Nissan's options, which leads us to our (compliance workshop's) options.

option #1: Nissan brings in more than 100 R35's to Australia (within 18 months of release).

result for us: sorry, only Nissan can bring it in.

option #2: Nissan declares they will bring it in under SEVS (like Mitsubishi did with EVO)

result for us: hooray, let's all get compliance and import R35's.

option #3: Nissan can say, "we're not bringing it in" (which they probably won't do)

result for us: wow, thanks for the heads up Nissan, that was kind, now let's bring in R35's.

option #4: Nissan doesn't bring them in for 18 months, but brings them in later possibly

result for us: we can bring in the cars built during those date ranges (same as S15)

don't think there's an option #5

Right, but a RAW can only do used cars, and emissions are harder on used cars than new cars. I don't have the numbers in front of me, so can someone check the SEVS emission requirements (from 2006/7?) versus Japan ULEV?

k, going home now....Jon might be replying from now on for today....

-david

The car has been built with emissions in mind and meets the Japanese U-LEV (Ultra Low Emissions Vehicle) standard meaning it has emissions 75% lower than those required by the current emissions criteria in Japan. There is also some sources saying it meets Californian ULEV standards as well but I don't blindly trust those sources.
Right, but a RAW can only do used cars, and emissions are harder on used cars than new cars. I don't have the numbers in front of me, so can someone check the SEVS emission requirements (from 2006/7?) versus Japan ULEV?

k, going home now....Jon might be replying from now on for today....

-david

Cheers for that. That was what I was missing. RAWS can only do used cars so we are back to 18 months of waiting to see what Nissan does.

lol my bad, jsut checked the SEVS listing and F50's are listed as used cars, its Y50 Fuga's that are new. d'oh.

So being listed as a New Import, does that mean that whoever imports the car has to sell it as their own product? so for example the Carizma GT-R? I'm assuming Nissan would then sue the pants off anyone selling it as their own product?

Yeah also they came out 2004 too I believe, I think the only way we can do a new car is if the major manufacture is not in Australia and the car meets all the criteria.

lol my bad, jsut checked the SEVS listing and F50's are listed as used cars, its Y50 Fuga's that are new. d'oh.

So being listed as a New Import, does that mean that whoever imports the car has to sell it as their own product? so for example the Carizma GT-R? I'm assuming Nissan would then sue the pants off anyone selling it as their own product?

I just wish Nissan australia would start selling ALL Skylines here again like the old R31 days.What a great shame they stopped selling skylines here right when the really good ones were just being released

It would be ok if they sold them at a reasonable price though...

I just wish Nissan australia would start selling ALL Skylines here again like the old R31 days.What a great shame they stopped selling skylines here right when the really good ones were just being released
Don't blame Nissan, blame the damn govt.

the same damn government that's got one of the best import laws for a country with its own automotive manufacturing industry?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...