Race Harness

[GWP021]

well now ive got a shiny new seat i need the shiny new seatbelt to go with

so where do i go to get a 4 point rda aproved race harness preferably clip in

stores or online i dont care as long as i can get it in the next month

oh and ballpark prices would be nice too

thanks all

GWP

[Kaido_RR]

Takata Racing Harness

i think its $500 for 4point, they are FIA approved, so im guessing they are cams approved

[R DIRTY 3]

Gav the one i have was around $300 from Revolution Race Gear. Its a williams 2".

[Kaido_RR]

Gav the one i have was around $300 from Revolution Race Gear. Its a williams 2".

my nismo harness are made by williams

[R DIRTY 3]

Wouldnt be surprised at all, but NISMO would be 3"?

3" is better for longer stints in the car but for 60 second motorkhana stuff the 2" works fine IMHO

[GWP021]

you got an addy for this place bard

[Kaido_RR]

Wouldnt be surprised at all, but NISMO would be 3"?

3" is better for longer stints in the car but for 60 second motorkhana stuff the 2" works fine IMHO

i think its 2" as it is no longer FIA approved

[R DIRTY 3]

Around the corner from my work

PM me your mobile and ill text it to you tomorrow.

[R DIRTY 3]

PM sent that may help you

[GTS-t VSPEC]

http://www.skylinesaustralia.com/forums/Ra...es-t204449.html

[Missinglink]

I got a 3 inch OMP 4 point harness from Go gear for about $240....came with most of the fitting to fit the skyline, clips and eye bolts that matched the existing seat belt bolts etc.

[Flash89]

how do the racing harness be fitted on as with my car i still got the back seats and no child restraners

[R DIRTY 3]

Drill holes in the rear parcel shelf. When you get eye bolts, also buy the reinforcment plates.

[Kaido_RR]

Drill holes in the rear parcel shelf. When you get eye bolts, also buy the reinforcment plates.

i was told, for the harness to be cams approved it can not be supported on the rear parcel shelf, as that section of the harness must be at a min angle or something along those lines.

i install two eye bolts where the bolts for the seat belts are (just removed the bolts, installed the eye bolts and used a large washer and bolt from under the car) you can still have the rear seat installed with this method too

[GTS-t VSPEC]

In the CAMS Handbook it has a diagram on the angle for the shoulder belts, somewhere between 0-15deg I think.

[Flash89]

oh ok ok cool

[djr81]

Go and see Dick Ward at Go Gear.

And get a 3", not a 2"

[Flash89]

i was told, for the harness to be cams approved it can not be supported on the rear parcel shelf, as that section of the harness must be at a min angle or something along those lines.

i install two eye bolts where the bolts for the seat belts are (just removed the bolts, installed the eye bolts and used a large washer and bolt from under the car) you can still have the rear seat installed with this method too

have you got a pic of this??