Jump to content
SAU Community

Recommended Posts

Hi all,

I've done a few searches, and I've had a read through this thread about body roll: http://www.skylinesaustralia.com/forums/Bo...ice-t77262.html

Basically, I want to start improving the handling of my R33, reducing some body roll. And I'm on a fairly tight budget (lol, don't they all say that). This car is a street driven daily driver for 99% of the time, so I'm thinking a combination of swaybars and (down the track when I've saved up) upgraded shocks/springs should give me the desired result.

Currently, the car is bog standard in the handling department, other than front and rear strut braces. Power-wise, I'd say it's around the 160-170rwkw mark, with plans to go as high as 200rwkw.

What would you guys suggest?

Edited by bnew
Link to comment
https://www.sau.com.au/forums/topic/204672-my-first-suspension-mod/
Share on other sites

If you check out the group buy section with the r33 suspension from Gary - sydney kid - theres some good info and parts there.

I did springs and shocks first

then sway bars and front caster

then f n r camber and rear subframe align kit

If I could do it again - Id go the sway bars first!

I did sway bars. (Whiteline)

Then springs/dampers/caster/camber. (Whiteline/Bilstein)

Then more camber. (Home made stuff)

Then more springs. (Eibach/Bilstein)

Then more sway bars.(Cusco)

And I haven't finished yet.

Best advice is to think carefully about where you want to end up & listen to some of the good advice you will get on this forums. But in doing so recognise that what some people like may not suit you and what suits some circumstances may not suit yours.

If you can do some research on how everything works & what changes have what effects you will be much better placed to understand peoples advice. I mean I have seen some shops recommend 10 & 8 kg/mm spring rates for the street for an R33.....so you can't take it all on trust.

Thanks guys, appreciate the advice. I want to try and avoid being someone who spends all their time and effort making my car go faster, without making it turn and stop better :banana:

Agreed about research- my initial first thought was due to research on SAU, on other sites and talking to people I know that have experience in this area. Can never be too well informed.

Swaybars are the best 1st suspension mod, you will feel the difference immediately.

I have a set of whitline swaybars and they transformed the handling of the car.

Also put whiteline springs and koni yellow shocks, which gave the car a nice drop and handles extremely well with no body roll at all.

I would suggest checking the condition of your bushes first, particularly front castor bushes. If these are worn or in poor condition I woudl replace those first. Then purchase the swaybars.

Yeah, was thinking of doing something like that too actually. Is there anyone on here that sells complete bushes sets? I had a look in the for sale section but I couldn't really see any.

EDIT: Never mind, Ministry of Bass to the rescue :(

Edited by bnew
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...