Jump to content
SAU Community

Recommended Posts

I recently bought a s13 and have been wanting to do a 25neo swap. I live in the us so neo motors are a rarity and the only place I can find them are from those sketchy canadians up north. And from them who knows what your gonna get. I can find r33 25's all day even in the states for a little extra but I dont know the potential I would be missing out on. I've heard a lot of good things about the neo besides the price of clutches and was wondering your thoughts. From what I here if anyone would know about these motors it would be you guys.

Link to comment
https://www.sau.com.au/forums/topic/204915-r33-rb25-vs-r34-rb25/
Share on other sites

well, for starters, I'm pretty sure the NEO's are fitted with RB26 rods from the factory so that would make them stronger.

They are also 9.3:1 Compression as opposed to the 9:1 compression of the R33 RB25

I've read they also have solid lifters and the vvt as apposed to the r33's but I was wondering if any body has pushed them and if they really mad more reliable power than the r33's.

The NEO tends to make more power for the same amount of mods better breathing due to head package). They are both as reliable as each other but the Neos' tend to have lower mileage which helps.

well, for starters, I'm pretty sure the NEO's are fitted with RB26 rods from the factory so that would make them stronger.

They are also 9.3:1 Compression as opposed to the 9:1 compression of the R33 RB25

interesting, can anyone back this up?

Also consider the availability of aftermarket turbo kits and ECU's (ie Power FC). Mods for the 33 are more readily available and cheaper than for the 34. NB: PFC are discontinued for RB25's

turbo kits from R33 fit perfect on R34, i do it all the time with the trust kits.

Bloody net dropping out!!!!!

Here we go, I'll retype again...

NVCS is only on one cam.

They run narrow body injectors

Stock turbo is weaker when boosted due to nylon comp wheel, ceramic exhaust wheel like r33

Mate Ben has R34 GT-T

Stock engine

tomei poncams 260

800cc inj

044

fuel reg

z32

power fc

front mount

plazma man plenum

T04Z

363RWKW @22 psi Z32 starting to max out.

He has a built RB30 bottom end to swap in due to nos system he intends to use with setup, no bull.

The way I look at it is that it makes a bit more grunt in factory trim so that can't be a bad thing . The electronics running it are a bit more advanced so if you can get control of those then its tighter controls IMO .

I think the non hydraulic buckets are a bonus and will open up your choice of cam profiles . If you really want to I'm sure there are ways to get larger injectors into them .

Also don't write off RB26's if you can get them for reasonable money , a few people have used those in the US .

Further O/T . If I was over there I'd be doing a killer KA24DE-T because there are so many parts available for them and they are std (DE) in a USDM S14 anyway . I guess its a case of how much your prepared to pay to be different . I don't remember the exact cc figures for both KA24 and RB25 but there's probably only 100cc's in it if that .

Cheers A .

Further O/T . If I was over there I'd be doing a killer KA24DE-T because there are so many parts available for them and they are std (DE) in a USDM S14 anyway . I guess its a case of how much your prepared to pay to be different . I don't remember the exact cc figures for both KA24 and RB25 but there's probably only 100cc's in it if that .

And an extra 2 cylinders bobbing away in the RB? Surley that counts for something?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...