Jump to content
SAU Community

Recommended Posts

Hi,

I have a Stock R34 GT-R and I put 20L of Caltex Vortex Premium by accident (which has a octane rating of 95) when I should have filled with Vortex Premium 98. This happened because there was no Shell V-Power left at the Shell servo so I decided to use Caltex for the first time and I thought Vortex Premuim was their 98 octane rating fuel.

So my question is this, do I have to empty the fuel tank of all the current fuel ASAP to avoid damage or can I get away with using this fuel (not driving hard) until it runs out and then fill up with the 98 octane rating fuel.

Thanks,

Glen

Link to comment
https://www.sau.com.au/forums/topic/205557-fuel-for-r34-gt-r/
Share on other sites

with the std ecu it has maps based on 98 RON fuel

now that the user has put in penis fuel (95 ron) the timing will be too advanced so it will combust without spark - detonate / knock

this in turn will tell the ECU its knocking (assuming stock ecu) and the ECU will drop the low octane map

its still bad for the engine and i wouldnt load it up on purpose with penis fuel in it

the stock ECU has no idea (or any ecu for that matter) what octane fuel is being used

all it does is watch the knock sensors for detonation, once it seems certain levels of detonation

it assumes penis fuel is in use and drops back to low octane maps, which basically have retarded timing on them

this makes the car not detonate as the timing is very relaxed and makes the car doughy and flat

yes so in summary

your options now that you have put penis fuel in the tank

1) drain the tank and put high octane in it

2) baby it around and then put high octane in once empty

3) use octane booster and baby it around a little - i would still avoid full loading it up

it will never detonate on light cruise / crusing at 100kmh in 5th or 6th

if its going to detonate with penis fuel, it will be when its ramping on boost or on full load

this is because the engine is under load, and has much more aggressive timing

I wouldn't use octane boost .. I'd rather not have that in my motor after seeing the dirty stains it left through my last GTR's head. Maybe its just cosmetic but even so.

The 34 GTR stock ECU will probably pull timing on you even when you are driving around normally. When I had even a slightly bad batch of 98 in my 34 it would pull timing quickly after driving for a little while and would leave it retarded until you switched the car off and back on. This happened more than once so i correlated the occasions to a particular servo and avoided that from then on.

Don't load it up and fill the tank with better fuel when you can next.

if u want to use octane booster...why not use snake oil, it will have better effects :P

http://au.youtube.com/watch?v=2jbcCr2ll3c

octane boosters do shit all. put that money into an extra 5ltrs of 98 :)

I dont know what you guys are talkin' bout. has anyone actually done it and had problems???? I assume it would if you are running a massive setup, but for basically stock applications it is fine. I have done it to trial different things to my car (I didn't drive it any different - still flogging the guts thru it) and it did nothing... Think... Its 3 octane different out of 95-98.

Don't be worried mate, if you want to be careful, just don't flog it too much. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...