Jump to content
SAU Community

Recommended Posts

Hi,

I have a Stock R34 GT-R and I put 20L of Caltex Vortex Premium by accident (which has a octane rating of 95) when I should have filled with Vortex Premium 98. This happened because there was no Shell V-Power left at the Shell servo so I decided to use Caltex for the first time and I thought Vortex Premuim was their 98 octane rating fuel.

So my question is this, do I have to empty the fuel tank of all the current fuel ASAP to avoid damage or can I get away with using this fuel (not driving hard) until it runs out and then fill up with the 98 octane rating fuel.

Thanks,

Glen

Link to comment
https://www.sau.com.au/forums/topic/205557-fuel-for-r34-gt-r/
Share on other sites

with the std ecu it has maps based on 98 RON fuel

now that the user has put in penis fuel (95 ron) the timing will be too advanced so it will combust without spark - detonate / knock

this in turn will tell the ECU its knocking (assuming stock ecu) and the ECU will drop the low octane map

its still bad for the engine and i wouldnt load it up on purpose with penis fuel in it

the stock ECU has no idea (or any ecu for that matter) what octane fuel is being used

all it does is watch the knock sensors for detonation, once it seems certain levels of detonation

it assumes penis fuel is in use and drops back to low octane maps, which basically have retarded timing on them

this makes the car not detonate as the timing is very relaxed and makes the car doughy and flat

yes so in summary

your options now that you have put penis fuel in the tank

1) drain the tank and put high octane in it

2) baby it around and then put high octane in once empty

3) use octane booster and baby it around a little - i would still avoid full loading it up

it will never detonate on light cruise / crusing at 100kmh in 5th or 6th

if its going to detonate with penis fuel, it will be when its ramping on boost or on full load

this is because the engine is under load, and has much more aggressive timing

I wouldn't use octane boost .. I'd rather not have that in my motor after seeing the dirty stains it left through my last GTR's head. Maybe its just cosmetic but even so.

The 34 GTR stock ECU will probably pull timing on you even when you are driving around normally. When I had even a slightly bad batch of 98 in my 34 it would pull timing quickly after driving for a little while and would leave it retarded until you switched the car off and back on. This happened more than once so i correlated the occasions to a particular servo and avoided that from then on.

Don't load it up and fill the tank with better fuel when you can next.

if u want to use octane booster...why not use snake oil, it will have better effects :P

http://au.youtube.com/watch?v=2jbcCr2ll3c

octane boosters do shit all. put that money into an extra 5ltrs of 98 :)

I dont know what you guys are talkin' bout. has anyone actually done it and had problems???? I assume it would if you are running a massive setup, but for basically stock applications it is fine. I have done it to trial different things to my car (I didn't drive it any different - still flogging the guts thru it) and it did nothing... Think... Its 3 octane different out of 95-98.

Don't be worried mate, if you want to be careful, just don't flog it too much. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...