Jump to content
SAU Community

Recommended Posts

spotted yesterday a wine R33 with P's,, south headn towards aldinga, a car load of people and something big holding the boot open ?

and police setting up a laser radar /random inspection sting on the top of the hill in seaford looking towards the victor harbour turnoff, 3 unmarked cars, and a van about 4:30-5

snuck thru unscathed in mixed in traffic..lol another van on on commercial road near maslins on the way back, but he was packing it up to go ? hope nobody in cruise got snared ?

Spotted a white 32 sedan with a girl driving and sau stickers yesterday. Don't know the name of the road though, somewhere out north..

Spotted the photos of Ryan's stag that got hit when a stupid red barina pulled out on him this morning. Was on South Rd just past Regency. Front right quarter panel, front bar, a front and a rear tyre & rim, front right headlight needs replacing.. which i suppose needs to be imported.. Probably one of the worst cars to hit in terms of fixing it!

Did anybody else see it?

My mate was telling me about this, he was in the stagea when it happened.

spotted the wine R33 again, hey jack im pretty sure it was you but you looked the other way...lol , spotted you again turning into seaford, not sure if you saw the Blue commowhore SS trying to get me to race as i came off the expressway...lol what a laugh.. !!!!! looked like he just smashed the nose on the car today?????? BOGAN!!!

Spotted a decent looking purple 180 on south rd near seaford , got a stare not sure if its someone on here or NS ?

Ok im my cross town travels this afternoon, travelled with a black stagea with black wheels down south road near port road, then on way back near turbo tune 2x R32 skylines, one 4 door and one 2 door then at cavan road/main north road intersection grey R33 ECR33 plates going towards ingle farm!

Spotted a whilte 32 4dr with female driver turning off milne road on to golden grove road

and also a white 33 with female driver going down milne road

Saw a dude in a black 32 gtr next to me as we were crossing over hampstead on regency road.. looked mint

Gave a nod got thumbs up in return...

-D

spotted a really nice green r33 on west tce when i was going to adelaide tyrepower this arvo

this morning spotted the silver r33 gtr i saw the other day on salisbury hwy

saw a black r33 on the mawson lakes intersection that meets up with salisbuy hwy this arvo

Saw way too many cars to remember yesterday at the Bushfire cruise. I do recall seeing SLY bay side blue GTR, Dstroy's black line (Gorgeous by the way) (The car that is lol). Not to mention about 50 other BSB R34 GTR's (Ok maybe 5) Someone in a cressida wagon dumped and huge rims lol. A Kermit the frog green gemini parked behind me. A lad with an immaculate purple 180 with s15 front end on it. The list goes on.. haven't got all night. Was a good turn out mind you.

Saw way too many cars to remember yesterday at the Bushfire cruise. I do recall seeing SLY bay side blue GTR, Dstroy's black line (Gorgeous by the way) (The car that is lol). Not to mention about 50 other BSB R34 GTR's (Ok maybe 5) Someone in a cressida wagon dumped and huge rims lol. A Kermit the frog green gemini parked behind me. A lad with an immaculate purple 180 with s15 front end on it. The list goes on.. haven't got all night. Was a good turn out mind you.

Whilst the cruise itself was way too short and had a bad route that went through many towns, it was good to see how many nice skylines that turned out prior to the cruise. Was awesome to see so many GTRs in one place, especially R34s, and DSTROY looked as nice in person as in the pics i've seen.

Spotted a bright yellow Stag on main nth yesterday heading towards town, stood out like the proverbial.

Also a shite load of legnums on the road between town and home last night.

And a rather off looking GTR at JIS on friday arvo (JMS car i think?), why someone would put a kit like that and a colour like that on a 32 gtr is beyond me!

Few others but thats what stood out

Really? we had an OZVR4 cruise at 11am Sunday, but wasnt aware of a cruise on Saturday evening at all... what do you call a shit load?

Spotted this R32 GTS4 on the aldinga esply before sunset, taking photos of the beach cliffs waiting for the cruise ship Arcadia to come by at sunset.fail :P to much smoke haze to see it enroute to Melb.from the cliff tops.Anyone here ?

a shot looking towards maslins, seaford rise notice the blue brown haze over the city... shot from aldinga with 300mm lens

Really? we had an OZVR4 cruise at 11am Sunday, but wasnt aware of a cruise on Saturday evening at all... what do you call a shit load?

Saw about 5-6 between Plympton and the city, maybe they're just standing out more on the roads.

Spotted a dark purple(with slight glitter-looking in the paint) R32 GTR with p plates, young looking guy, doing burnouts/donuts along with his mate in a bright orange 300ZX at the Arndale Kilkenny bus interchange car park at a charity cruise on Sunday :P

Absolute idiots... must be related to the guy with the Soarer at last year's SAU dyno day...

Looking back at the BSM cruise photos... its this R32 GTR right here! lol...

That dude always rocks up to BP on West Tce on friday nights, short dude with a gay mullet, think he also rides a green road bike with silver stripes on it and blue neons.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...