Jump to content
SAU Community

Recommended Posts

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

sounds like a commy driver trying to convert to skylines

just cant let go off the chromies and shit yo

on the subject of commodore drivers, I spotted a f**kwit p-plater in a red vr nearly take my front end of this afternoon when the toss changed lanes in front of me without allowing enough room. When I beeped the horn at him and got a filthy look in his mirror it was apparent that even though I had to hit the brakes I was still in the wrong.....

spotted a white 4 door 34 that is suffering a poor poor life, had a very very very ugly front bar, very r33 veilside styled, but much worse. standard sideskirts and rear bar. had chrome starcorps. RIP little fella.

I think I know the car your talking about, I parked next to it in the city, it has a number plate made up of a random series of numbers and letters?(I couldn't decipher it). The bar sticks out a long way forward, it has an ET exhaust and I think its auto. RIP

on the subject of commodore drivers, I spotted a f**kwit p-plater in a red vr nearly take my front end of this afternoon when the toss changed lanes in front of me without allowing enough room. When I beeped the horn at him and got a filthy look in his mirror it was apparent that even though I had to hit the brakes I was still in the wrong.....

Got that attitude from a 4WD bitch last night. Using the size of her vehicle to manipulate people. Not me.

Liana vs Landcruiser :sweat:

spotted [RRS-400] on main northroad near parafield airport, grey 34 4 door on new 'S' plates near en field maccas, black 33 also on new 'S' plates turning off regency onto main north, and a silver 33 on the top level of wislons parking on hindley. all between 8 and 9:30 am.

spotted the same silver r33 on port rd that i always see in the morning......

spotted the purple r33 gtr "RH1" in the same spot on port rd

and a white r33 on salisbury hwy this arvo aswell

yesterday heard, then saw a silver stag boosting it up a hill near my place. saw some sort of silver rims, lowered and exhuast near port noarlunga.

then on the way to work, saw another silver stag with black rims, floor it around traffic onto lonsdale road.

today saw 3 stags, 2 silver and 1 wine red all looked pretty stock. one of the silver ones was a s2 the other 2 where s1's

saw them on brighton road around 4ish

only saw 2 33's and no 32's. are all the skylines defected or what?

white 33 with white wheels (with dish) on daws road today about 1pm,

went thru my worksite (the etsa truck parked off to the side) at respectable speed (thanks :sweat: )

looked a bit like aberax's 33, but couldnt tell from up there LOL

white 33 with white wheels (with dish) on daws road today about 1pm,

went thru my worksite (the etsa truck parked off to the side) at respectable speed (thanks :blink: )

looked a bit like aberax's 33, but couldnt tell from up there LOL

:sweat: Could have been me, pulled out of a side street after going to jaycar and there was possibly a etsa truck on the side of the road, I'm not safe anymore :) .

I did the speed limit, i just got there quicker then other cars. :)

:sweat: Could have been me, pulled out of a side street after going to jaycar and there was possibly a etsa truck on the side of the road, I'm not safe anymore :) .

I did the speed limit, i just got there quicker then other cars. :)

haha so it was you :blink:

:w00t: all good on ya speed, better than half the twats that just flew by

Just out on my balcony spotted a gun meteal grey R33 then about 5 min later a bunch of bikes. Also a commy driver trying to do a burnout on Grenfell st cops pull him up a few minutes later he didnt see them a few cars back. :P

Edited by moose_r33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...