Jump to content
SAU Community

Recommended Posts

Hey guys,

Have a mildy modded 32gtr -> 13psi (stock turbos), cat back 3.5", hiflow cat and modded airbox. Have read changing the dumps is a turbo off jobbie which is fine as its a w/e car but is it worth the time and effort & will the difference be noticeable in sound/performance? Who here has undertaken this? Will also change the front pipe @ the same time, or is this worth doing instead and leaving the stock dumps?

Any info appretiated

Regards

mike

Link to comment
https://www.sau.com.au/forums/topic/205957-r32-gtr-front-pipes-dump/
Share on other sites

Just about to make the same sort of changes myself.

From my understanding the standard R32 dumps are quite restrictive, and the standard front pipes remind me of a straw in some parts so I would say changing these will open it up a bit.

They run so damn rich though especially if you up the stock boost - mine gets as rich as 10.5:1 up top on 13psi - a remap or PowerFC and some cam gears in conjunction with the exhaust should really give you some more poke.

Plenty of gain in changing out R32 dumps.

R34 dumps are pretty good, but the 32 ones are just crap and the car will benefit from added flow due to less restriction.

Also do front pipes also, no point doing it by halves.

thanx

nismoid: yeh definetly doing the front pipe whilst im @ it.

Paul: Yeh noticed how thin the pipes were. The previous owner claims the stock ecu was remapped but didnt think it could be done & i think he was getting confused with them (xspeed) meaning they were checking the AFR. AFR is 11.5.

What benefit will changing the cam gears give? Is this changing the timing to give longer duration? would there be any downsides as in reduced bottom end?

Mike

Yep apparently the R32 ECU is completely re-flashable so - as long as your not changing things like injectors or air flow meters - are a really good option if you got someone that can tune them. I guess you can also get things like speed cuts removed.

Re: cam timing - my knowledge is a shady but from what I understand the cam timing from factory was set up for shorter duration with emissions in mind - so yeah adjusting for longer duration gives the gain.

Anyone else more knowledgeable clued up on this?

Edited by paulR32gtr

stock R32 ECU's can be remapped for injectors, AFM's, the works... no issue there.

And cam gear's offer good gains, have a search as there are a couple of detailed write ups on them now from two users who did testing.

Definatly change the dump pipes. I took my stock on out and yes it looks like straws. Lucky I changed it tho cuz my mechanic found it had a hole in it. Now I got these huge dump pipes and the air flow is much better. You will notice the difference. Also it makes a "WOOOO" noise and sounds good. LOL

Get rid of the stock turbos they will be your worst nightmare later on, get some r34 n1's aka garrett GT2860R - 707160 - 5 or -7's

replace the dumps and front pipe too dumps from hks, trust, tomei, xforce, all good!

Edited by Angus Smart

Thanks for the info.

I knew the 32 gts's was completely remappable just wasnt sure bout the gtr's. So previous owner was right then.

Yeh thought the Y piece and dumps would change the tunes a little.

Been thinking long & hard bout changing the turbos while im @ it for reliability issues cause have always been nervous of turbine failure. Happy powerwise the way it is though but have read too many cases of turbine failure especially since im running 13-14psi.....

On the otherhand my best m8 has a EVO IX with a full 3" system, cosworth cams, 25psi + a verso tune, both cars are dead even in a straight line (small variances through changing gears) running exactly the same terminals @ the local strip (178km) but he'll be getting a bigger turbo down the track :ninja:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...