Jump to content
SAU Community

Turbo Gaskets:

grandmasterb

By grandmasterb,
in Engines & Forced Induction

 Share

Recommended Posts

grandmasterb Grand Master

grandmasterb

Posted
Posted

So i need to replace the gaskets on my TD-06 L2 20g to finish off the rebuild on my RB20.

Im having trouble finding anyone that stocks or can get a hold of the gaskets and just wondering if anyone has replaced theres before and who did they go through???

I need:

manifold

manifold to turbo

turbo to dump

Any help appreciated

Cheers Ben

PS: i know this is now in 2 sections but had no replies so far and i know guys like Troy, James and Silvergtst are running the same turbo :D

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/
Share on other sites
abu Grand Master

abu

Posted
Posted

I had the biggest prick of the time trying to find a manifold to head gasket to suit RB20/25.

I have the part number and called NISSAN and they want between $103 - $115 which I thought was a rip off so ended up ordering it through RHD JAPAN.

About $71 incl air mail express delivery to my door, which is pretty good considering the prices here.

Part #14036-21U00

https://www.rhdjapan.com/home/products/prod...roduct_id=3277#

As for the other gasket any good local exhaust shop should have them.

Good luck.

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3647717
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted

i got a few, i found :ninja:

sorry bout other day comp dropped out :(

email me your addy and i will arrange to send them $30 for the two trust ones. Call MD Spares in moorabin for your head to manifold gasket.

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3649419
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
i got a few, i found :(

sorry bout other day comp dropped out ;)

email me your addy and i will arrange to send them $30 for the two trust ones. Call MD Spares in moorabin for your head to manifold gasket.

Email sent :ninja:

Will get onto MD Spares on Monday

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3649774
Share on other sites
  • 1 month later...
grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
Autobarn....that's where I got my ones

Hey Dan

my local Autobarn couldn't help me as "i" didn't have the part numbers, as you would see Trent replied last month about having them but i haven't heard back since transferring the money so the search continues so i can finish the car.

I will call a couple of the AB stores in Melbourne/Sydney tomorrow and see if they are able to help out further.

Cheers Ben

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3759142
Share on other sites
Proximity Motorsport Experienced

Proximity Motorsport

Posted
Posted

GCG have the gaskets... call them..not cheap though.. i think around the $50 mark for a dump gasket... you can use ur old one with some glue... or ifyour flanges are real smoothe and rust free just use exhuast seals and no gasket...

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3759523
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted
Hey Dan

my local Autobarn couldn't help me as "i" didn't have the part numbers, as you would see Trent replied last month about having them but i haven't heard back since transferring the money so the search continues so i can finish the car.

I will call a couple of the AB stores in Melbourne/Sydney tomorrow and see if they are able to help out further.

Cheers Ben

WTF????? i have not recieved your money and we even called and SMS'd to see if you still wanted them, with no reply................... they are still here waiting in the same spot.

I take offense to the above greatly. If you have proof of transfer (im assuming wrong acc) let me know or at least call me 0419 590220 if there was a problem

post-34927-1207007399_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3760565
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
WHAT????? i have not recieved your money and you did not reply to CATS calls or SMS................... they are still here waiting.

Transfered 29/2/08 01:27:19 pm, receipt number: N022986488721

I replied to the sms and also sent you a couple of emails but didn't hear anything :( .

Just checked again and the account details are correct (from sms) so you should of received it, no biggy though i just need the gaskets to finish the car hence trying to source them elsewhere.

Not having ago at you or Cat just want to finish the car Trent and figured you guys have been busy :(

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3760590
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
I think you should send the Pringles as well, a show of good faith

No need for good faith, just some crossed wires so it looks :rant:

BUT i do have the munchies a little after finishing work and some pringles would go down a treat :)

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3764237
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...