Jump to content
SAU Community

Recommended Posts

So i need to replace the gaskets on my TD-06 L2 20g to finish off the rebuild on my RB20.

Im having trouble finding anyone that stocks or can get a hold of the gaskets and just wondering if anyone has replaced theres before and who did they go through???

I need:

manifold

manifold to turbo

turbo to dump

Any help appreciated

Cheers Ben

PS: i know this is now in 2 sections but had no replies so far and i know guys like Troy, James and Silvergtst are running the same turbo :D

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/
Share on other sites

I had the biggest prick of the time trying to find a manifold to head gasket to suit RB20/25.

I have the part number and called NISSAN and they want between $103 - $115 which I thought was a rip off so ended up ordering it through RHD JAPAN.

About $71 incl air mail express delivery to my door, which is pretty good considering the prices here.

Part #14036-21U00

https://www.rhdjapan.com/home/products/prod...roduct_id=3277#

As for the other gasket any good local exhaust shop should have them.

Good luck.

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3647717
Share on other sites

i got a few, i found :ninja:

sorry bout other day comp dropped out :(

email me your addy and i will arrange to send them $30 for the two trust ones. Call MD Spares in moorabin for your head to manifold gasket.

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3649419
Share on other sites

i got a few, i found :(

sorry bout other day comp dropped out ;)

email me your addy and i will arrange to send them $30 for the two trust ones. Call MD Spares in moorabin for your head to manifold gasket.

Email sent :ninja:

Will get onto MD Spares on Monday

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3649774
Share on other sites

  • 1 month later...
Autobarn....that's where I got my ones

Hey Dan

my local Autobarn couldn't help me as "i" didn't have the part numbers, as you would see Trent replied last month about having them but i haven't heard back since transferring the money so the search continues so i can finish the car.

I will call a couple of the AB stores in Melbourne/Sydney tomorrow and see if they are able to help out further.

Cheers Ben

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3759142
Share on other sites

GCG have the gaskets... call them..not cheap though.. i think around the $50 mark for a dump gasket... you can use ur old one with some glue... or ifyour flanges are real smoothe and rust free just use exhuast seals and no gasket...

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3759523
Share on other sites

Hey Dan

my local Autobarn couldn't help me as "i" didn't have the part numbers, as you would see Trent replied last month about having them but i haven't heard back since transferring the money so the search continues so i can finish the car.

I will call a couple of the AB stores in Melbourne/Sydney tomorrow and see if they are able to help out further.

Cheers Ben

WTF????? i have not recieved your money and we even called and SMS'd to see if you still wanted them, with no reply................... they are still here waiting in the same spot.

I take offense to the above greatly. If you have proof of transfer (im assuming wrong acc) let me know or at least call me 0419 590220 if there was a problem

post-34927-1207007399_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3760565
Share on other sites

WHAT????? i have not recieved your money and you did not reply to CATS calls or SMS................... they are still here waiting.

Transfered 29/2/08 01:27:19 pm, receipt number: N022986488721

I replied to the sms and also sent you a couple of emails but didn't hear anything :( .

Just checked again and the account details are correct (from sms) so you should of received it, no biggy though i just need the gaskets to finish the car hence trying to source them elsewhere.

Not having ago at you or Cat just want to finish the car Trent and figured you guys have been busy :(

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3760590
Share on other sites

I think you should send the Pringles as well, a show of good faith

No need for good faith, just some crossed wires so it looks :rant:

BUT i do have the munchies a little after finishing work and some pringles would go down a treat :)

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3764237
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...