Jump to content
SAU Community

Recommended Posts

removed everything down to the sound proofing muck on the floor, 4w steer long gone, all unused brackets bolts heat shields.

fuel tank when today and put a fuel cell in and that alone will be the best part of 15kg i think.

Link to comment
https://www.sau.com.au/forums/topic/206293-gtr-r32-weight/#findComment-3651256
Share on other sites

if rules allow for it maybe remove the rad support and front and rear reinforcement bars and replace with chromolly tubing. also maybe start drilling holes in flat non structural body panels and dimple die'ing it.

Link to comment
https://www.sau.com.au/forums/topic/206293-gtr-r32-weight/#findComment-3651378
Share on other sites

Yes that all long gone.

door windows winders motors etc are gone door trims too still need to take the hole saw to the door frames though.

I do have a substancial cage in the car though so there would be 30 odd kgs in that.

Looks like some gram light wheels and carbon fibre bonnet and boot are next

Link to comment
https://www.sau.com.au/forums/topic/206293-gtr-r32-weight/#findComment-3651852
Share on other sites

a few other things you may or may not have taken out,

rear wiper and motor.

In mine I stripped back the entire wiring loom and removed all the excess wiring that is now not used. There was a substancial ammount of "free" weight there. You can halve the wiring under the dash easily.

ABS been removed and the assosiated wiring??

Running a full exhaust still or side pipe??

Link to comment
https://www.sau.com.au/forums/topic/206293-gtr-r32-weight/#findComment-3652135
Share on other sites

There is not a great deal you can do without besides the ABS, air conditioning etc its more about saving weight.

Besides the obvious, you can strip the loom and rewire with the bare essentials. you'd be suprised how much wiring is unused once you remove the HICAS, ABS etc.

Single turbo conversions are lighter than typical twins.

Stick with alloy piping if possible.

Carbon canisters can be removed as well as the piping

Heater hoses and other water lines if you have stripped the inside out

Washer bottle and hoses.

Smaller battery

You can pretty much take anything out thats not needed if your building a circuit car.

Link to comment
https://www.sau.com.au/forums/topic/206293-gtr-r32-weight/#findComment-3652376
Share on other sites

gee... i dont know how come ours is so heavy?

our car still weigh's 1380!

carbon boot

carbon doors

carbon airfilter box

no dash cluster

carbon panel and stack dash

one seat

no air conditioning

no abs

no hicas or pumps

nothing behind the dash

lexan door windows

no interior at all

some internal panels cut out

all bumper reinforcement gone

no rear wiper or motoboot and bonnet cathes gone

all boot hinge mechanism gone

most brackets gone

not sure how i could lose another 100 kilo, let alone 150!! :)

Edited by giant
Link to comment
https://www.sau.com.au/forums/topic/206293-gtr-r32-weight/#findComment-3652436
Share on other sites

If its a track car then i think you would be silly to remove ABS.

Thats only my 2c...along with the fact that everbody seems to be obsessed with removing weight, which is fair enough. But no one ever seems to consider that you can do a hell of a lot with relocating where the weight is located. ie moving it lower in the car or into the cabin/centre of the car

Link to comment
https://www.sau.com.au/forums/topic/206293-gtr-r32-weight/#findComment-3652450
Share on other sites

you have a pretty comprehensive cage in it though.

Mine only had a rear jap half when it was last weighed. besides the carbon pannels mine is as stripped as your car.

There is always the chance of errors on the scales behalf as well I guess (public weigh bridge in my last case)

Link to comment
https://www.sau.com.au/forums/topic/206293-gtr-r32-weight/#findComment-3652571
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...