Jump to content
SAU Community

Recommended Posts

There is not a great deal you can do without besides the ABS, air conditioning etc its more about saving weight.

Besides the obvious, you can strip the loom and rewire with the bare essentials. you'd be suprised how much wiring is unused once you remove the HICAS, ABS etc.

Single turbo conversions are lighter than typical twins.

Stick with alloy piping if possible.

Carbon canisters can be removed as well as the piping

Heater hoses and other water lines if you have stripped the inside out

Washer bottle and hoses.

Smaller battery

You can pretty much take anything out thats not needed if your building a circuit car.

Guys,

when removing the carbon canister do you just block the outlets or do they need to be reconnected somewhere

chromolly is 1/3 the price. who has the weight figures of standard vs chromolly v cf?

concept. will await this reply!!

and would like to know about the carbon canister too. mines floating around somewhere in my engine bay hardly attached to anything

I don't get the rush for the c/f tailshaft unless you have too much money to spend.

chromolly is 1/3 the price. who has the weight figures of standard vs chromolly v cf?

Because I just want to be able to say to girls:

"Yes that's right ladies......... I have a carbon shaft. Form an orderly line to the left, and no pushing."

either way its still weight i want to get rid of as thats my main goal for now.

and on the plus side, single piece shaft rather than the current.

and barron, a light weight clutch/flywheel would be somewhere 5x (+++) the cost of the shaft correct?

No Angus i just put a 4.2 kg alloy flywheel on for 500$

http://www.vividracing.com/catalog/acpt-ca...r32-p-9406.html

Is there anywhere in australia that makes them? Or just US shops? I'd like one, but I doubt they're off the shelf items for my car.

hey, since my car has a r34 gearbox in a r32 i need an odd sized one also.

so get your length of your shaft right and i can forward on to him if your interested. as i've told him i need an odd sized one too.

$1400 !

Thats very good.

People spend more than that on making thier GTR look faggy.

A carbon tailshaft is well worth the money. Manufacturers are using them now on fairly cheap sports cars for the range of benifits they offer.

I've got this on my list of mods for my R32 GTR bunky and I'm only building a 300rwkw car.

any chance one of you guys know how much a bare and empty r32 gtr fuel tank weighs ?

Titanium exhaust = 23 ks

but surely you can get lighter exhausts? i've got a 3" zorst that weighs 12kgs ( not inlcuding cat, front pipe, dump pipe)

Edited by Dan_J
he was saying 23kgs is the amount of weight saved. most titanium systems would be under 6kg.

oh ok thanks for clearing that up

at a guess i would say a bare gtr fuel tank is 12 to 14 kg.

you wouldnt have a spare one that u cud just wack on sum scales to double check? :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...