Jump to content
SAU Community

Recommended Posts

Hey lads,

I've got some stickers on the boot and left and right fenders that i want to get rid of, they're kinda old looking.

What's the best/safest method to do this? I heard a blowdryer and some kind of solution will do it?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/206310-removing-stickers/
Share on other sites

what i used on mine was a hair dryer, then the stickers came off easily, but had a little bit of a sticky residue left, and a guy told me to use 'wax and grease' remover, and it worked a treat and didnt heart the paint..

Hey lads,

I've got some stickers on the boot and left and right fenders that i want to get rid of, they're kinda old looking.

What's the best/safest method to do this? I heard a blowdryer and some kind of solution will do it?

Thanks in advance.

that's right, just use blow dryer and pry them off with your fingers or something that's solid but won't scratch the metal surface

sticky residue you can take off either with blow drying again and smudging it off slowly or methylated spirit

a citric based adhesive remover available from Bunnings. It smells like oranges and may even have orange something in the name can't remember but it is the best, completey non-toxic and won't damage anything... it so good it will remove windscreen sealants from stuff as well, no problem...

a citric based adhesive remover available from Bunnings. It smells like oranges and may even have orange something in the name can't remember but it is the best, completey non-toxic and won't damage anything... it so good it will remove windscreen sealants from stuff as well, no problem...

Listen to the man! Tried it to get the sticky stuff left over from my old service sticker off, worked a treat!!

A word of warning with citric adhesive remover- it marked my clearcoat.

Blowdryer worked good and the stickers are off, but i'm not using the adhesive remover for any more of the glue.

What about metho or wax & grease remover? Are they gentle on the clearcoat?

I'm not fussed about the paint, it looks as though a professional detailer can just polish it out :whistling:

Thats interesting that you say it damaged your clear coat cause it's just orange juice, that would mean you don't need brake fluid to stuff peoples paint jobs just some juice...

I've never heard of it damageing anything, in fact we use it to get adhesive off clients cars all the time...

  • 2 weeks later...
Thats interesting that you say it damaged your clear coat cause it's just orange juice, that would mean you don't need brake fluid to stuff peoples paint jobs just some juice...

I've never heard of it damageing anything, in fact we use it to get adhesive off clients cars all the time...

i have that problem....the stupid dumb japs left it on my car and never wiped it off....on my front left quarter i have drop spots......not happy....essentially took it back to the bare metal....oh well....as long as i seal it over for now it wont rust.....

as for the sticker removal....im gonna do that 2moz.........hair dryer and metho....and while im there...take off the other stickers on the inside of my windscreen.......

Metho is completley safe for car paint. i use it everyday on cars at work to prep for sticker application. not really ideal for removing the glue, bug and tar/citric based stuff is best. just roll the glue with your thumb and it should come off.

if you get the heat just right with your hairdryer u wont leave behind any glue anyways.

Edited by sivart

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...