Jump to content
SAU Community

Brakepads For A Track Day / High Performance Driving Day

some_cs_student
 Share

Recommended Posts

some_cs_student Veteran

some_cs_student

Posted
Posted

Hey everyone,

I'm about to do my first track-day with driver dynamics and I am not too sure about my brake pads on my R33 GTR.

Currently the rear pads are pretty worn in and I have no idea what brake pads its been running since it came from Japan.

It has been advised that I should get some track-day pads for this like: HAWK HT-10, and change the fluid over on the brake's.

It might be a good opportunity to put in the Aus. braided brake lines and remove the Japanese ones too :rofl:

EDIT: found recommended pads sticky, I'm considering the QFM A1.RM.

Should I buy a dedicated track-day pad that I put on and use for track days only? And then remove afterwards again?

Do track-pads need to be bedded in before use? Or can I just use them on the day?

Also do I get some standard DOT4 brake fluid?

I'm not going to be attending track days that often but I don't want to end up into a wall at Sandown because of brake fade.

The brakes appear to be standard with a larger front rotor (I think).

Thanks,

Gareth

evil_weevil Grand Master

evil_weevil

Posted
Posted

Ive always used benedicts ultimates for street and track and never had issues, just alot of brake dust. Had brake fade because the standard fluid boiled. Now have some good dot 5 and havent had an issue.

If your not doing track days all the time, some benedicts, ferodo or similar will be good enough and decent for the pricing.

braided lines will help, but change the pads and the lines first, then bleed brakes and put the dot 5 in :(

scathing Grand Master

scathing

Posted
Posted

If you're willing to swap pads out before a track day and pop your streeters back in afterwards, then do so. It'll cost you less in the long run if you do enough track days to justify it.

Street pads tend to overheat and break down really quickly on the track, killing their life, and track pads are expensive to just commute on and tend to have bad feel and squeal when cold, require activation heat to start working, and cost more.

If you're willing to go as far as working on the brakes, its also quite easy to replace your rotors at the same time so I'd suggest running track rotors too.

NYTSKY Grand Master

NYTSKY

Posted
Posted

Project Mu type NR pads ive found are good for a run around the track.Rated to 850 deg C.

For every day driving i use Project Mu B spec pads.

EDIT:No im not a rep for Project Mu :)

gslrallysport Experienced

gslrallysport

Posted
Posted
EDIT: found recommended pads sticky, I'm considering the QFM A1.RM.

Yep, they would be the go! They're VERY similar to Race Brakes RB74, they're still useable on the street, whilst good for 780 degrees, which is more than enough for most track days. And cheap at $110 per set.

Also do I get some standard DOT4 brake fluid?

Depends on how much you want to spend and how serious you want to be. Regularly changed Dot 4 fluid should be fine, or else this is what we use and recommends for high performance applications:

http://forums.justcommodores.com.au/gsl-ra...rake-fluid.html

ferni Grand Master

ferni

Posted
Posted

If you're running street tyres you should be able to get away with a decent set of street/track pads, IE DS2500 or those QFMs....

If you're running semis then i'd suggest running track pads for trackdays. IE DS3000 or Hawk HT10 etc...

As for fluid, Get some of that Motul RBF600 (5.1), it's cheap enough to use, about 25 bucks at a motorbike store

some_cs_student Veteran

some_cs_student

Posted
  • Author
Posted

Thanks for the info, I will have a look around at getting some QFM A1.RM pads or similar. The GTR is running the standard brembo's does anyone know the normal price for these?

gslrallysport Experienced

gslrallysport

Posted
Posted
There is a groupbuy going on somewhere on here, about $110 a set - bloody cheap!

Depends if he's got the Nissan or Brembo Brakes. If its the Brembo's, then they're $145 a set, and won't be available through the Group Buy as they're exclusive to GSL RallySport...

Also $110-$120 is pretty standard for the A1RM, I really don't know why that's a group buy thread as their isn't any discount for quantities and its not being done like a group buy.

bloodsword27 Veteran

bloodsword27

Posted
Posted

lol as long as you dont go for the PMU D1 pads lol alot of good pads out there but find something with a large heatrange to cover street and track work :(

  • 2 weeks later...
SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

now i've got some conflicting info here.

A1RM = 580 degrees, at the MOST!

Source = guy who developed the pads

He said the A1RM's are NO WHERE NEAR 780 degree's. And considering QFM doesn't have a website, and development as has stopped, i don't know how to check this. And given the price of A1RM's vs RB74's (bout $150 front OR rear, near'ish $300 total) it would explain why the A1RM's are a lot cheaper.

yet, everywhere i google, it comes up with A1RM=780 degree's???? sooooo confused..... the dude who made them, and everyone selling them.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • Kinkstaah
      Strange issue RB25DET wont start

      By Kinkstaah · Posted

      I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • Kinkstaah
      First time Skyline owner

      By Kinkstaah · Posted

      The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • Kinkstaah
      Chris' Toyota Mark ii JZX110

      By Kinkstaah · Posted

      I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • GTSBoy
      Chris' Toyota Mark ii JZX110

      By GTSBoy · Posted

      I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...