Jump to content
SAU Community

Recommended Posts

I got a new turbo put on, and used a 1.06 rear housing instead of a .82 rear and the car sounds allot deeper then before, the engine sounds the same and runs really good but the exaust note is tuffer and deeper...

oh its a GT3540 with 1.06 it used to be .82 ar and front is the same.

I was wondering if this is normal or should i look for a exaust leak or something ;)

Edited by Guilt-Toy

I very much doubt its an exhaust leak mate, but obviously check the gaskets and what not.

Exhaust leak will generally sound alot louder, and not "tuff", "deep" or "throaty" but more rattly.

On a side note, how is the car to drive with such a large housing?

The 1.06 on the 30det isn't too bad surprisingly.. It makes 1bar+ a little before 4000rpm.

The only real difference to the smaller .82 is the .82 begins making boost much earlier in the rpm; the larger 1.06 seems to make no boost no boost then within 400-500rpm it brings it all on but linear and smooth.

The 1.06 you loose that windmill feel at low rev's part throttle but by all means they still feel quite good on the 3ltr.

Not sure about you question but i have one for you!

What do you reckon of the bigger rear?

Yeah its good i wreckon, i can feel the car feels much more free off boost, and it seems to make 5psi by 3300rpm and full boost 1bar by about 3800. I have not upped the boost past 1 bar yet because i spent all my money on this turbo so there not even enough money to pay for extra fuel for road tuning either.

I very much doubt its an exhaust leak mate, but obviously check the gaskets and what not.

Exhaust leak will generally sound alot louder, and not "tuff", "deep" or "throaty" but more rattly.

On a side note, how is the car to drive with such a large housing?

Its good, I am thinking it has the same power at 9psi then it used to have at 15. So 20psi will be interesting, before i made 363rwkw on 25psi now it will be making that on 18psi i wreckon. Should be interesting

i would say that yes the larger housing would change the exhaust note, after all it is flowing a lot more freely, and is a larger chamber compared to before.

got lag at all tho?

Yes it raised the rpm for boost by about 300 - 400rpm

To the people inquiring about lag, he is running an RB30DET. From the dyno sheets i have seen they are normaly well on their way to making boost by 4000 rpm with the 1.06 rears.

mmmm yes. RB30DET.

Here are some pics from my mission last weekend, i took my time with it and used my old housings and gtr_etr sent me his 1.06 to swap with my .82 from QLD, thanks mate!... oh it took me about 4 hours all up to change it over by myself.

Have a look at the pics, i couldnt believe the difference between the two.

post-1240-1204149998_thumb.jpg

.82 left 1.06 Right

post-1240-1204150015_thumb.jpg

.82 left 1.06 Right

post-1240-1204150053_thumb.jpg

.82 left 1.06 Right

post-1240-1204150979_thumb.jpg

1.06 front .82 rear

post-1240-1204150076_thumb.jpg

Pic of changing it all over

post-1240-1204150283_thumb.jpg

Putting compressor cover on

Edited by Guilt-Toy

I know no one probly cares.. but i had some interesting fun with this new turbino on my car tonight

I gave it a quick street tune, just 3 hits in second gear only to fix the arf's up, got it down to 11.3 afr and far out.

I would have to say it has close to the same power before on only 18psi of boost.

This car is now going to be an animal, i was shocked after the third run and did not hit boost again, bit hairy going sideways and stuff.

cant wait to spend a few hours on the dyno with it. and on the map tracer you can see that the boost does come on 400rpm later, it goes to full load 19 at rev point 12 when before it used to be 11.

not bad! im going to like this new setup :)

the larger housing is now on and yes it does alter the exhausrt note. Power comes on later tho that is to be expected on a 25.

The engine is on a mild tune at the moment making 335 killer wasps at 20 lb.

No timing or cam dial in yet. thats next weeks project I am hoping it may bring boost on a tad earlier as I dont think the power delivery would be much chop for track work. Any hoos, we'll see what happens with a few more pound of boost and some cam and timing work.

nah not yet, but i would like to once its tuned up

Sounds awesome.To you take the car to the strip much?
nice work guilt-toy

Sorry I missed your calls yesterday too - Left my phone in the car.

I still think you should put the WMI kit on and aim for 400rwkw :P

thats cool man, i will ring you in a sec

the larger housing is now on and yes it does alter the exhausrt note. Power comes on later tho that is to be expected on a 25.

The engine is on a mild tune at the moment making 335 killer wasps at 22 lb.

No timing or cam dial in yet. thats next weeks project I am hoping it may bring boost on a tad earlier as I dont think the power delivery would be much chop for track work. Any hoos, we'll see what happens with a few more pound of boost and some cam and timing work.

mine is a rb30det, so its not tooo bad.

these turbos are great for rb's !! my car sounds sooo much tuffer, especially in the mid range and just before it hits limiter, and when it hits limiter man it sounds like a animal! on low boost. i dunno if i will go much further then 22psi this time around

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...