Jump to content
SAU Community

Recommended Posts

As the tittle says, anyone going to this?

Keen to get the V35 out for a lap or two.

http://autosports.com.au/events/view/8

Below is the info from their site.

Cheers

Bobby

$160 PER PERSON

60 POSITIONS

5 GROUPS

10 MINUTE SESSIONS

FULL TIMING AVAILABLE

WE WILL TRY TO HAVE PASSENGER SESSIONS

Come along and take advantage of Autosports own driver trainers John Boston and Paul Kemal for no additional cost.

These events are for both experienced and those with no experience who want to learn more about getting into motorsport.

Arrive at track at 7.30am

Sign-on before 8.00am

Driver Briefing at 8.30am

First Session starts at 9.00am

Link to comment
https://www.sau.com.au/forums/topic/208245-wakefield-15th-march-anyone-going/
Share on other sites

  • Replies 202
  • Created
  • Last Reply

Top Posters In This Topic

yeah and most of the time it involves me sinking cans. well I am called the beer baron. not the "i go to trackdays baron". lol. and if you must know I'll have the silvia out at Oran Park next weekend. :P

I am keen but 15th is F1 weekend boys. I'll be in melbourne sinking cans!

Yep, and what better way to get over the fact that I can't go to the F1 then to yell my a$$ of through Wakefield pretending I'm Murray Walker.

And it's Go GO GO

Greg,

You still going mate?

I'm in.

Booked yesterday.

The car's getting a health check this Sat and if anything comes up wierd I may have to ditch it, but otherwise will be there.

You going down Sat morning Chris?

I'll see if anyone else is cruising down from JDMST. I know there are a few staying there the night before.

Cheers

Bobby




  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...