Jump to content
SAU Community

Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

The VE shape lends itself well to the coupe design. I think it looks good. Have you guys seen the LS7 sedan HSV made? http://www.drive.com.au/Editorial/ArticleD...ArticleID=49261

Was an awesome idea. The wheels on that thing are terrible though. Not really a huge fan of its look...

The coupe on the other hand! :P

I was confronted this morning to a god ugly picture of what is Hole-dan's new halo product. My first impressions were two fold.

1. The tradition continues in that Hole-dan's have absolutely no taste and that these products are as visually stimulating as moldy toast.

2. Hole-dan's staunch continuity to appeal for the boy racer crowd with their fuel guzzling big block V8's that could drill a hole in your wallet.

:D:P

Edited by Barbarian

It has too many lines running on all four sides, seems too busy.

Whilst the Europeans and the Japanese are occupying their engineering know how on hi-tech engines, Hole-dan's continue to bust out concepts with 7.8ltr or 9.6ltr imported V8 engines that come into Aus in crates. Mind you, a Euro car can produce the same amount of power output from a mere 4.4ltr v8 engine, almost half the size of this fuel thirsty Hole-dan's. Did i mention the fact that both gen 3 and gen 4 Hole-dan v8's use the push rod technology of 60's?

Give me a Audi A5 coupe

header2.jpg

or

BMW 3 Coupe.. instead please.

BMW_335i_Coupe_Berg_3.jpg

Edited by Barbarian

That is farking awesome! Hope they build it! I love the styling and interior. Interesting to see the mechanical package though.

Love the Motec ADL dash, the shift lights on the steering wheel. One piece moulded seats. The stylinbg onf the car looks nega aggressive and a nice chiseld profile which really accentuate the pumped guards. Reminds me a little of the older CLK DTM cars. Please or please Holden make sure it has a bout 350kws, decent brakes and a good manual gearbox, because i love the styling of the thing.

Also love the side pipes. Perhaps the rear qtr could cut a lower profile as the rear wheels dont perhaps take up enough real estate as they should to ensure better proportions.

I wonder if this is a goer (Surely Holden dont have enough money to build these sorts of concept cars unless there is a strong chance of production, even if only for other markets) what will happen to Camaros downunder. Will they still be imported? Will they be priced above/below these.

Dont like it. Tail lights look odd. the roofline/boot part looks odd. Looks way too bulky in height... and has a Holden badge ew.

the other points in your post hold some merit, i think the contrary, but whatever, if it does see production, many aspects will change.

as for the bit about the holden badge, open your bollocksing eyes. stop being so damn single minded. its attitudes like that which cause so much trouble in the automotive 'enthusiast' scene.

appreciate the car for what it is, dont simply write it off because of the badge.

made me lol edit, bollocks. nicely done to whoever set that up.

Edited by scandyflick
I was confronted this morning to a god ugly picture of what is Hole-dan's new halo product. My first impressions were two fold.

1. The tradition continues in that Hole-dan's have absolutely no taste and that these products are as visually stimulating as moldy toast.

2. Hole-dan's staunch continuity to appeal for the boy racer crowd with their fuel guzzling big block V8's that could drill a hole in your wallet.

:P:(

Hey point 1 is personal taste. Im with someone else in saying that this Holden looks better then the R35, 350Z or anything Nissan have done of late. It looks tough, though i can see plenty of styling sotlen of Mercs and Audi, but on a whole i think its a good looking package.

As for point 2...have you driven any late model Holdens 8s? I drive the work SS Crewman a bit around town and on interstate trips. Its hsocking when i am towing the rally car, but off its own bat it gets great fuel economy. About 12-13L/100km around town or 9.5-10l/100km on the freeway. So to me thats more a funciton of the cars weight then the engine. It does damn well

As foe your pushrod argument. That is so tired and with the work they have thrown at the design, means they lose little/no performance over DOHC engines. The big bonus is that these engines are brought to us for a lot cheaper and are easier to package into cars so they come to market in cars like out Holdens and Corvettes for a damn site cheaper then anything they could do otherwise.

It sall personbal opinion, but when ppl cant be open minded and offer praise where its due, or appreciate the design and reasoning behind things.

Did i mention the fact that both gen 3 and gen 4 Hole-dan v8's use the push rod technology of 60's?

So f**king what? God I'm sick of people using this f**king argument.

Pushrods aren't 1960s technology. It's late 1800s/early 1900s, and look so is OHC/DOHC., but that's alright isnt it?

What's wrong with pushrods anyway?

Edited by RyanVLSL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...